Istio Mesh Expansion

Instructions for integrating VMs and bare metal hosts into an Istio mesh deployed on Kubernetes.

Prerequisites

  • Setup Istio on Kubernetes by following the instructions in the Installation guide.

  • The machine must have IP connectivity to the endpoints in the mesh. This typically requires a VPC or a VPN, as well as a container network that provides direct (without NAT or firewall deny) routing to the endpoints. The machine is not required to have access to the cluster IP addresses assigned by Kubernetes.

  • The Istio control plane services (Pilot, Mixer, CA) and Kubernetes DNS server must be accessible from the VMs. This is typically done using an Internal Load Balancer. You can also use NodePort, run Istio components on VMs, or use custom network configurations, separate documents will cover these advanced configurations.

Installation steps

Setup consists of preparing the mesh for expansion and installing and configuring each VM.

An example script to help with Kubernetes setup is available as part of the release bundle and in install/tools/setupMeshEx.sh. Check the script content and environment variables supported (like GCP_OPTS).

An example script to help configure a machine is available as part of the release bundle and in install/tools/setupIstioVM.sh. You should customize it based on your provisioning tools and DNS requirements.

Preparing the Kubernetes cluster for expansion

  • Setup Internal Load Balancers (ILBs) for Kube DNS, Pilot, Mixer and CA. This step is specific to each cloud provider, so you may need to edit annotations.
kubectl apply -f install/kubernetes/mesh-expansion.yaml
  • Generate the Istio ‘cluster.env’ configuration to be deployed in the VMs. This file contains the cluster IP address ranges to intercept.
export GCP_OPTS="--zone MY_ZONE --project MY_PROJECT"

install/tools/setupMeshEx.sh generateClusterEnv MY_CLUSTER_NAME

Example generated file:

cat cluster.env

ISTIO_SERVICE_CIDR=10.63.240.0/20
  • Generate DNS configuration file to be used in the VMs. This will allow apps on the VM to resolve cluster service names, which will be intercepted by the sidecar and forwarded.
# Make sure your kubectl context is set to your cluster
install/tools/setupMeshEx.sh generateDnsmasq

Example generated file:

cat kubedns

server=/svc.cluster.local/10.150.0.7
address=/istio-mixer/10.150.0.8
address=/istio-pilot/10.150.0.6
address=/istio-ca/10.150.0.9
address=/istio-mixer.istio-system/10.150.0.8
address=/istio-pilot.istio-system/10.150.0.6
address=/istio-ca.istio-system/10.150.0.9

Setting up the machines

As an example, you can use the following “all inclusive” script to copy and install the setup:

# Check what the script does to see that it meets your needs.
export GCP_OPTS="--zone MY_ZONE --project MY_PROJECT"
# change to the namespace you wish to use for VMs but 'vm' is what the bookinfo guide assumes
export SERVICE_NAMESPACE=vm

install/tools/setupMeshEx.sh machineSetup VM_NAME

Or the equivalent manual steps:

—— Manual setup steps begin ——

  • Copy the configuration files and Istio Debian files to each machine joining the cluster. Save the files as /etc/dnsmasq.d/kubedns and /var/lib/istio/envoy/cluster.env.

  • Configure and verify DNS settings. This may require installing dnsmasq and either adding it to /etc/resolv.conf directly or via DHCP scripts. To verify, check that the VM can resolve names and connect to pilot, for example:

On the VM/external host:

host istio-pilot.istio-system

Example generated message:

# Verify you get the same address as shown as "EXTERNAL-IP" in 'kubectl get svc -n istio-system istio-pilot-ilb'
istio-pilot.istio-system has address 10.150.0.6

Check that you can resolve cluster IPs. The actual address will depend on your deployment.

host istio-pilot.istio-system.svc.cluster.local.

Example generated message:

istio-pilot.istio-system.svc.cluster.local has address 10.63.247.248

Check istio-ingress similarly:

host istio-ingress.istio-system.svc.cluster.local.

Example generated message:

istio-ingress.istio-system.svc.cluster.local has address 10.63.243.30
  • Verify connectivity by checking whether the VM can connect to Pilot and to an endpoint.
curl 'http://istio-pilot.istio-system:8080/v1/registration/istio-pilot.istio-system.svc.cluster.local|http-discovery'

{
  "hosts": [
   {
    "ip_address": "10.60.1.4",
    "port": 8080
   }
  ]
}

# On the VM, use the address above. It will directly connect to the pod running istio-pilot.
curl 'http://10.60.1.4:8080/v1/registration/istio-pilot.istio-system.svc.cluster.local|http-discovery'
  • Extract the initial Istio authentication secrets and copy them to the machine. The default installation of Istio includes Istio CA and will generate Istio secrets even if the automatic ‘mTLS’ setting is disabled (it creates secret for each service account, and the secret is named as istio.<serviceaccount>). It is recommended that you perform this step to make it easy to enable mTLS in the future and to upgrade to a future version that will have mTLS enabled by default.
# ACCOUNT defaults to 'default', or SERVICE_ACCOUNT environment variable
# NAMESPACE defaults to current namespace, or SERVICE_NAMESPACE environment variable
# (this step is done by machineSetup)
# On a mac either brew install base64 or set BASE64_DECODE="/usr/bin/base64 -D"
install/tools/setupMeshEx.sh machineCerts ACCOUNT NAMESPACE

The generated files (key.pem, root-cert.pem, cert-chain.pem) must be copied to /etc/certs on each machine, readable by istio-proxy.

  • Install Istio Debian files and start ‘istio’ and ‘istio-auth-node-agent’ services. Get the debian packages from github releases or:

    # Note: This will be replaced with an 'apt-get' command once the repositories are setup.

source istio.VERSION # defines version and URLs env var
curl -L ${PILOT_DEBIAN_URL}/istio-agent.deb > ${ISTIO_STAGING}/istio-agent.deb
curl -L ${AUTH_DEBIAN_URL}/istio-auth-node-agent.deb > ${ISTIO_STAGING}/istio-auth-node-agent.deb
curl -L ${PROXY_DEBIAN_URL}/istio-proxy.deb > ${ISTIO_STAGING}/istio-proxy.deb

dpkg -i istio-proxy-envoy.deb
dpkg -i istio-agent.deb
dpkg -i istio-auth-node-agent.deb

systemctl start istio
systemctl start istio-auth-node-agent

—— Manual setup steps end ——

After setup, the machine should be able to access services running in the Kubernetes cluster or other mesh expansion machines.

# Assuming you install bookinfo in 'bookinfo' namespace
curl productpage.bookinfo.svc.cluster.local:9080

... html content ...

Check that the processes are running:

ps aux |grep istio

root      6941  0.0  0.2  75392 16820 ?        Ssl  21:32   0:00 /usr/local/istio/bin/node_agent --logtostderr
root      6955  0.0  0.0  49344  3048 ?        Ss   21:32   0:00 su -s /bin/bash -c INSTANCE_IP=10.150.0.5 POD_NAME=demo-vm-1 POD_NAMESPACE=default exec /usr/local/bin/pilot-agent proxy > /var/log/istio/istio.log istio-proxy
istio-p+  7016  0.0  0.1 215172 12096 ?        Ssl  21:32   0:00 /usr/local/bin/pilot-agent proxy
istio-p+  7094  4.0  0.3  69540 24800 ?        Sl   21:32   0:37 /usr/local/bin/envoy -c /etc/istio/proxy/envoy-rev1.json --restart-epoch 1 --drain-time-s 2 --parent-shutdown-time-s 3 --service-cluster istio-proxy --service-node sidecar~10.150.0.5~demo-vm-1.default~default.svc.cluster.local

Istio auth node agent is healthy:

sudo systemctl status istio-auth-node-agent

● istio-auth-node-agent.service - istio-auth-node-agent: The Istio auth node agent
   Loaded: loaded (/lib/systemd/system/istio-auth-node-agent.service; disabled; vendor preset: enabled)
   Active: active (running) since Fri 2017-10-13 21:32:29 UTC; 9s ago
     Docs: https://istio.io/
 Main PID: 6941 (node_agent)
    Tasks: 5
   Memory: 5.9M
      CPU: 92ms
   CGroup: /system.slice/istio-auth-node-agent.service
           └─6941 /usr/local/istio/bin/node_agent --logtostderr

Oct 13 21:32:29 demo-vm-1 systemd[1]: Started istio-auth-node-agent: The Istio auth node agent.
Oct 13 21:32:29 demo-vm-1 node_agent[6941]: I1013 21:32:29.469314    6941 main.go:66] Starting Node Agent
Oct 13 21:32:29 demo-vm-1 node_agent[6941]: I1013 21:32:29.469365    6941 nodeagent.go:96] Node Agent starts successfully.
Oct 13 21:32:29 demo-vm-1 node_agent[6941]: I1013 21:32:29.483324    6941 nodeagent.go:112] Sending CSR (retrial #0) ...
Oct 13 21:32:29 demo-vm-1 node_agent[6941]: I1013 21:32:29.862575    6941 nodeagent.go:128] CSR is approved successfully. Will renew cert in 29m59.137732603s

Running services on a mesh expansion machine

  • Configure the sidecar to intercept the port. This is configured in ``/var/lib/istio/envoy/sidecar.env`, using the ISTIO_INBOUND_PORTS environment variable.

    Example (on the VM running the service):

echo "ISTIO_INBOUND_PORTS=27017,3306,8080" > /var/lib/istio/envoy/sidecar.env
systemctl restart istio

  • Manually configure a selector-less service and endpoints. The ‘selector-less’ service is used for services that are not backed by Kubernetes pods.

    Example, on a machine with permissions to modify Kubernetes services:

    # istioctl register servicename machine-ip portname:port
istioctl -n onprem register mysql 1.2.3.4 3306
istioctl -n onprem register svc1 1.2.3.4 http:7000

After the setup, Kubernetes pods and other mesh expansions should be able to access the services running on the machine.

Putting it all together

See the BookInfo Mesh Expansion guide.