pilot-discovery
Istio Pilot provides fleet-wide traffic management capabilities in the Istio Service Mesh.
Flags | Description |
---|---|
--ctrlz_address <string> | The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`) |
--ctrlz_port <uint16> | The IP port to use for the ControlZ introspection facility (default `9876`) |
--keepaliveInterval <duration> | The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`) |
--keepaliveMaxServerConnectionAge <duration> | Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`) |
--keepaliveTimeout <duration> | After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`) |
--log_as_json | Whether to format output as JSON or in plain console-friendly format |
--log_caller <string> | Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``) |
--log_output_level <string> | Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`) |
--log_rotate <string> | The path for the optional rotating log file (default ``) |
--log_rotate_max_age <int> | The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`) |
--log_rotate_max_backups <int> | The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`) |
--log_rotate_max_size <int> | The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`) |
--log_stacktrace_level <string> | Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`) |
--log_target <stringArray> | The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`) |
pilot-discovery discovery
Start Istio proxy discovery service.
pilot-discovery discovery [flags]
Flags | Shorthand | Description |
---|---|---|
--appNamespace <string> | -a | Restrict the applications namespace the controller manages; if not set, controller watches all namespaces (default ``) |
--clusterRegistriesNamespace <string> | Namespace for ConfigMap which stores clusters configs (default ``) | |
--configDir <string> | Directory to watch for updates to config yaml files. If specified, the files will be used as the source of config, rather than a CRD client. (default ``) | |
--consulserverURL <string> | URL for the Consul server (default ``) | |
--ctrlz_address <string> | The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`) | |
--ctrlz_port <uint16> | The IP port to use for the ControlZ introspection facility (default `9876`) | |
--disable-install-crds | Disable discovery service from verifying the existence of CRDs at startup and then installing if not detected. It is recommended to be disable for highly available setups. | |
--domain <string> | DNS domain suffix (default `cluster.local`) | |
--grpcAddr <string> | Discovery service grpc address (default `:15010`) | |
--httpAddr <string> | Discovery service HTTP address (default `:8080`) | |
--keepaliveInterval <duration> | The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`) | |
--keepaliveMaxServerConnectionAge <duration> | Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`) | |
--keepaliveTimeout <duration> | After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`) | |
--kubeconfig <string> | Use a Kubernetes configuration file instead of in-cluster configuration (default ``) | |
--log_as_json | Whether to format output as JSON or in plain console-friendly format | |
--log_caller <string> | Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``) | |
--log_output_level <string> | Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`) | |
--log_rotate <string> | The path for the optional rotating log file (default ``) | |
--log_rotate_max_age <int> | The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`) | |
--log_rotate_max_backups <int> | The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`) | |
--log_rotate_max_size <int> | The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`) | |
--log_stacktrace_level <string> | Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`) | |
--log_target <stringArray> | The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`) | |
--mcpInitialConnWindowSize <int> | Initial connection window size for MCP's gRPC connection (default `1048576`) | |
--mcpInitialWindowSize <int> | Initial window size for MCP's gRPC connection (default `1048576`) | |
--mcpMaxMsgSize <int> | Max message size received by MCP's grpc client (default `4194304`) | |
--meshConfig <string> | File name for Istio mesh configuration. If not specified, a default mesh will be used. (default `/etc/istio/config/mesh`) | |
--monitoringAddr <string> | HTTP address to use for pilot's self-monitoring information (default `:15014`) | |
--namespace <string> | -n | Select a namespace where the controller resides. If not set, uses ${POD_NAMESPACE} environment variable (default ``) |
--networksConfig <string> | File name for Istio mesh networks configuration. If not specified, a default mesh networks will be used. (default `/etc/istio/config/meshNetworks`) | |
--plugins <stringSlice> | comma separated list of networking plugins to enable (default `[authn,authz,health,mixer]`) | |
--profile | Enable profiling via web interface host:port/debug/pprof | |
--registries <stringSlice> | Comma separated list of platform service registries to read from (choose one or more from {Kubernetes, Consul, MCP, Mock}) (default `[Kubernetes]`) | |
--resync <duration> | Controller resync interval (default `1m0s`) | |
--secureGrpcAddr <string> | Discovery service grpc address, with https (default `:15012`) | |
--trust-domain <string> | The domain serves to identify the system with spiffe (default ``) |
pilot-discovery request
Makes an HTTP request to Pilot metrics/debug endpoint
pilot-discovery request <method> <path> [<body>] [flags]
Flags | Description |
---|---|
--ctrlz_address <string> | The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`) |
--ctrlz_port <uint16> | The IP port to use for the ControlZ introspection facility (default `9876`) |
--keepaliveInterval <duration> | The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`) |
--keepaliveMaxServerConnectionAge <duration> | Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`) |
--keepaliveTimeout <duration> | After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`) |
--log_as_json | Whether to format output as JSON or in plain console-friendly format |
--log_caller <string> | Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``) |
--log_output_level <string> | Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`) |
--log_rotate <string> | The path for the optional rotating log file (default ``) |
--log_rotate_max_age <int> | The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`) |
--log_rotate_max_backups <int> | The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`) |
--log_rotate_max_size <int> | The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`) |
--log_stacktrace_level <string> | Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`) |
--log_target <stringArray> | The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`) |
pilot-discovery version
Prints out build version information
pilot-discovery version [flags]
Flags | Shorthand | Description |
---|---|---|
--ctrlz_address <string> | The IP Address to listen on for the ControlZ introspection facility. Use '*' to indicate all addresses. (default `localhost`) | |
--ctrlz_port <uint16> | The IP port to use for the ControlZ introspection facility (default `9876`) | |
--keepaliveInterval <duration> | The time interval if no activity on the connection it pings the peer to see if the transport is alive (default `30s`) | |
--keepaliveMaxServerConnectionAge <duration> | Maximum duration a connection will be kept open on the server before a graceful close. (default `2562047h47m16.854775807s`) | |
--keepaliveTimeout <duration> | After having pinged for keepalive check, the client/server waits for a duration of keepaliveTimeout and if no activity is seen even after that the connection is closed. (default `10s`) | |
--log_as_json | Whether to format output as JSON or in plain console-friendly format | |
--log_caller <string> | Comma-separated list of scopes for which to include caller information, scopes can be any of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] (default ``) | |
--log_output_level <string> | Comma-separated minimum per-scope logging level of messages to output, in the form of <scope>:<level>,<scope>:<level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:info`) | |
--log_rotate <string> | The path for the optional rotating log file (default ``) | |
--log_rotate_max_age <int> | The maximum age in days of a log file beyond which the file is rotated (0 indicates no limit) (default `30`) | |
--log_rotate_max_backups <int> | The maximum number of log file backups to keep before older files are deleted (0 indicates no limit) (default `1000`) | |
--log_rotate_max_size <int> | The maximum size in megabytes of a log file beyond which the file is rotated (default `104857600`) | |
--log_stacktrace_level <string> | Comma-separated minimum per-scope logging level at which stack traces are captured, in the form of <scope>:<level>,<scope:level>,... where scope can be one of [ads, all, analysis, attributes, authn, caSecretController, configMapController, conversions, default, grpcAdapter, k8sController, kube, kube-converter, mcp, meshconfig, model, pkiCaLog, processing, rbac, resource, rootCertRotator, runtime, server, serverCaLog, source, validation] and level can be one of [debug, info, warn, error, fatal, none] (default `default:none`) | |
--log_target <stringArray> | The set of paths where to output the log. This can be any path as well as the special values stdout and stderr (default `[stdout]`) | |
--output <string> | -o | One of 'yaml' or 'json'. (default ``) |
--short | -s | Use --short=false to generate full version information |
Environment variables
These environment variables affect the behavior of thepilot-discovery
command.Variable Name | Type | Default Value | Description |
---|---|---|---|
AUDIENCE | String |
| Expected audience in the tokens. |
AUTHZ_FAILURE_LOG_BURST_SIZE | Integer | 1 | |
AUTHZ_FAILURE_LOG_FREQ | Time Duration | 1m0s | |
BYPASS_OOP_MTLS_SAN_VERIFICATION | Boolean | false | Whether or not to validate SANs for out-of-process adapters auth. |
CITADEL_ENABLE_JITTER_FOR_ROOT_CERT_ROTATOR | Boolean | true | If true, set up a jitter to start root cert rotator. Jitter selects a backoff time in seconds to start root cert rotator, and the back off time is below root cert check interval. |
CITADEL_SELF_SIGNED_CA_CERT_TTL | Time Duration | 87600h0m0s | The TTL of self-signed CA root certificate. |
CITADEL_SELF_SIGNED_ROOT_CERT_CHECK_INTERVAL | Time Duration | 1h0m0s | The interval that self-signed CA checks its root certificate expiration time and rotates root certificate. Setting this interval to zero or a negative value disables automated root cert check and rotation. This interval is suggested to be larger than 10 minutes. |
CITADEL_SELF_SIGNED_ROOT_CERT_GRACE_PERIOD_PERCENTILE | Integer | 20 | Grace period percentile for self-signed root cert. |
ISTIOD_ADDR | String |
| Service name of istiod. If empty the istiod listener, certs will be disabled. |
ISTIO_GPRC_MAXSTREAMS | Integer | 100000 | Sets the maximum number of concurrent grpc streams. |
ISTIO_LANG | String |
| Selects the attribute expression language runtime for Mixer. |
K8S_INGRESS_NS | String |
| |
KUBERNETES_SERVICE_HOST | String |
| Kuberenetes service host, set automatically when running in-cluster |
MAX_WORKLOAD_CERT_TTL | Time Duration | 2160h0m0s | The max TTL of issued workload certificates. |
PILOT_BLOCK_HTTP_ON_443 | Boolean | true | If enabled, any HTTP services will be blocked on HTTPS port (443). If this is disabled, any HTTP service on port 443 could block all external traffic |
PILOT_CERT_DIR | String |
| |
PILOT_DEBOUNCE_AFTER | Time Duration | 100ms | The delay added to config/registry events for debouncing. This will delay the push by at least this internal. If no change is detected within this period, the push will happen, otherwise we'll keep delaying until things settle, up to a max of PILOT_DEBOUNCE_MAX. |
PILOT_DEBOUNCE_MAX | Time Duration | 10s | The maximum amount of time to wait for events while debouncing. If events keep showing up with no breaks for this time, we'll trigger a push. |
PILOT_DEBUG_ADSZ_CONFIG | Boolean | false | |
PILOT_DISABLE_XDS_MARSHALING_TO_ANY | Boolean | false | |
PILOT_DISTRIBUTION_HISTORY_RETENTION | Time Duration | 1m0s | If enabled, Pilot will keep track of old versions of distributed config for this duration. |
PILOT_ENABLE_CONFIG_DISTRIBUTION_TRACKING | Boolean | true | If enabled, Pilot will assign meaningful nonces to each Envoy configuration message, and allow users to interrogate which envoy has which config from the debug interface. |
PILOT_ENABLE_CRD_VALIDATION | Boolean | false | If enabled, pilot will validate CRDs while retrieving CRDs from kubernetes cache.Use this flag to enable validation of CRDs in Pilot, especially in deployments that do not have galley installed. |
PILOT_ENABLE_EDS_DEBOUNCE | Boolean | true | If enabled, Pilot will include EDS pushes in the push debouncing, configured by PILOT_DEBOUNCE_AFTER and PILOT_DEBOUNCE_MAX. EDS pushes may be delayed, but there will be fewer pushes. By default this is enabled |
PILOT_ENABLE_FALLTHROUGH_ROUTE | Boolean | true | EnableFallthroughRoute provides an option to add a final wildcard match for routes. When ALLOW_ANY traffic policy is used, a Passthrough cluster is used. When REGISTRY_ONLY traffic policy is used, a 502 error is returned. |
PILOT_ENABLE_HEADLESS_SERVICE_POD_LISTENERS | Boolean | true | If enabled, for a headless service/stateful set in Kubernetes, pilot will generate an outbound listener for each pod in a headless service. This feature should be disabled if headless services have a large number of pods. |
PILOT_ENABLE_MYSQL_FILTER | Boolean | false | EnableMysqlFilter enables injection of `envoy.filters.network.mysql_proxy` in the filter chain. |
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_INBOUND | Boolean | true | If enabled, protocol sniffing will be used for inbound listeners whose port protocol is not specified or unsupported |
PILOT_ENABLE_PROTOCOL_SNIFFING_FOR_OUTBOUND | Boolean | true | If enabled, protocol sniffing will be used for outbound listeners whose port protocol is not specified or unsupported |
PILOT_ENABLE_REDIS_FILTER | Boolean | false | EnableRedisFilter enables injection of `envoy.filters.network.redis_proxy` in the filter chain. |
PILOT_ENABLE_UNSAFE_REGEX | Boolean | false | If enabled, pilot will generate Envoy configuration that does not use safe_regex but the older, deprecated regex field. This should only be enabled to support legacy deployments that have not yet been migrated to the new safe regular expressions. |
PILOT_HTTP10 | Boolean | false | Enables the use of HTTP 1.0 in the outbound HTTP listeners, to support legacy applications. |
PILOT_INBOUND_PROTOCOL_DETECTION_TIMEOUT | Time Duration | 1s | Protocol detection timeout for inbound listener |
PILOT_INITIAL_FETCH_TIMEOUT | Time Duration | 0s | Specifies the initial_fetch_timeout for config. If this time is reached without a response to the config requested by Envoy, the Envoy will move on with the init phase. This prevents envoy from getting stuck waiting on config during startup. |
PILOT_PUSH_THROTTLE | Integer | 100 | Limits the number of concurrent pushes allowed. On larger machines this can be increased for faster pushes |
PILOT_RESPECT_DNS_TTL | Boolean | true | If enabled, DNS based clusters will respect the TTL of the DNS, rather than polling at a fixed rate. This option is only provided for backward compatibility purposes and will be removed in the near future. |
PILOT_RESTRICT_POD_UP_TRAFFIC_LOOP | Boolean | true | If enabled, this will block inbound traffic from matching outbound listeners, which could result in an infinite loop of traffic. This option is only provided for backward compatibility purposes and will be removed in the near future. |
PILOT_SCOPE_GATEWAY_TO_NAMESPACE | Boolean | false | If enabled, a gateway workload can only select gateway resources in the same namespace. Gateways with same selectors in different namespaces will not be applicable. |
PILOT_SCOPE_PUSHES | Boolean | true | If enabled, pilot will attempt to limit unnecessary pushes by determining what proxies a config or endpoint update will impact. |
PILOT_SIDECAR_USE_REMOTE_ADDRESS | Boolean | false | UseRemoteAddress sets useRemoteAddress to true for side car outbound listeners. |
PILOT_SKIP_VALIDATE_TRUST_DOMAIN | Boolean | false | Skip validating the peer is from the same trust domain when mTLS is enabled in authentication policy |
PILOT_TRACE_SAMPLING | Floating-Point | 100 | Sets the mesh-wide trace sampling percentage. Should be 0.0 - 100.0. Precision to 0.01. Default is 100, not recommended for production use. |
POD_NAME | String |
| |
POD_NAMESPACE | String |
| |
ROOT_CA_DIR | String | ./etc/cacerts | Location of a local or mounted CA root |
TERMINATION_DRAIN_DURATION_SECONDS | Integer | 5 | The amount of time allowed for connections to complete on pilot-agent shutdown. On receiving SIGTERM or SIGINT, pilot-agent tells the active Envoy to start draining, preventing any new connections and allowing existing connections to complete. It then sleeps for the TerminationDrainDuration and then kills any remaining active Envoy processes. |
TOKEN_ISSUER | String |
| OIDC token issuer. If set, will be used to check the tokens. |
USE_ISTIO_JWT_FILTER | Boolean | false | Use the Istio JWT filter for JWT token verification. |
WEBHOOK | String |
| Name of webhook config to patch, if istioctl is not used. |
WORKLOAD_CERT_TTL | Time Duration | 2160h0m0s | The TTL of issued workload certificates. |
Exported metrics
Metric Name | Type | Description |
---|---|---|
citadel_secret_controller_csr_err_count | Sum | The number of errors occurred when creating the CSR. |
citadel_secret_controller_csr_sign_err_count | Sum | The number of errors occurred when signing the CSR. |
citadel_secret_controller_secret_deleted_cert_count | Sum | The number of certificates recreated due to secret deletion (service account still exists). |
citadel_secret_controller_svc_acc_created_cert_count | Sum | The number of certificates created due to service account creation. |
citadel_secret_controller_svc_acc_deleted_cert_count | Sum | The number of certificates deleted due to service account deletion. |
citadel_server_authentication_failure_count | Sum | The number of authentication failures. |
citadel_server_csr_count | Sum | The number of CSRs received by Citadel server. |
citadel_server_csr_parsing_err_count | Sum | The number of errors occurred when parsing the CSR. |
citadel_server_csr_sign_err_count | Sum | The number of errors occurred when signing the CSR. |
citadel_server_id_extraction_err_count | Sum | The number of errors occurred when extracting the ID from CSR. |
citadel_server_root_cert_expiry_timestamp | LastValue | The unix timestamp, in seconds, when Citadel root cert will expire. We set it to negative in case of internal error. |
citadel_server_success_cert_issuance_count | Sum | The number of certificates issuances that have succeeded. |
endpoint_no_pod | LastValue | Endpoints without an associated pod. |
galley_runtime_processor_event_span_duration_milliseconds | Distribution | The duration between each incoming event |
galley_runtime_processor_events_processed_total | Count | The number of events that have been processed |
galley_runtime_processor_snapshot_events_total | Distribution | The number of events per snapshot |
galley_runtime_processor_snapshot_lifetime_duration_milliseconds | Distribution | The duration of each snapshot |
galley_runtime_processor_snapshots_published_total | Count | The number of snapshots that have been published |
galley_runtime_state_type_instances_total | LastValue | The number of type instances per type URL |
galley_runtime_strategy_on_change_total | Count | The number of times the strategy's onChange has been called |
galley_runtime_strategy_timer_max_time_reached_total | Count | The number of times the max time has been reached |
galley_runtime_strategy_timer_quiesce_reached_total | Count | The number of times a quiesce has been reached |
galley_runtime_strategy_timer_resets_total | Count | The number of times the timer has been reset |
galley_source_kube_dynamic_converter_failure_total | Count | The number of times a dynamnic kubernetes source failed converting a resources |
galley_source_kube_dynamic_converter_success_total | Count | The number of times a dynamic kubernetes source successfully converted a resource |
galley_source_kube_event_error_total | Count | The number of times a kubernetes source encountered errored while handling an event |
galley_source_kube_event_success_total | Count | The number of times a kubernetes source successfully handled an event |
galley_validation_cert_key_update_errors | Count | Galley validation webhook certificate updates errors |
galley_validation_cert_key_updates | Count | Galley validation webhook certificate updates |
galley_validation_config_load | Count | k8s webhook configuration (re)loads |
galley_validation_config_load_error | Count | k8s webhook configuration (re)load error |
galley_validation_config_update_error | Count | k8s webhook configuration update error |
galley_validation_config_updates | Count | k8s webhook configuration updates |
galley_validation_failed | Count | Resource validation failed |
galley_validation_http_error | Count | Resource validation http serve errors |
galley_validation_passed | Count | Resource is valid |
istio_build | LastValue | Istio component build info |
istio_mcp_clients_total | LastValue | The number of streams currently connected. |
istio_mcp_message_sizes_bytes | Distribution | Size of messages received from clients. |
istio_mcp_reconnections | Sum | The number of times the sink has reconnected. |
istio_mcp_recv_failures_total | Sum | The number of recv failures in the source. |
istio_mcp_request_acks_total | Sum | The number of request acks received by the source. |
istio_mcp_request_nacks_total | Sum | The number of request nacks received by the source. |
istio_mcp_send_failures_total | Sum | The number of send failures in the source. |
mixer_config_adapter_info_config_errors_total | LastValue | The number of errors encountered during processing of the adapter info configuration. |
mixer_config_adapter_info_configs_total | LastValue | The number of known adapters in the current config. |
mixer_config_attributes_total | LastValue | The number of known attributes in the current config. |
mixer_config_handler_configs_total | LastValue | The number of known handlers in the current config. |
mixer_config_handler_validation_error_total | LastValue | The number of errors encountered because handler validation returned error. |
mixer_config_instance_config_errors_total | LastValue | The number of errors encountered during processing of the instance configuration. |
mixer_config_instance_configs_total | LastValue | The number of known instances in the current config. |
mixer_config_rule_config_errors_total | LastValue | The number of errors encountered during processing of the rule configuration. |
mixer_config_rule_config_match_error_total | LastValue | The number of rule conditions that was not parseable. |
mixer_config_rule_configs_total | LastValue | The number of known rules in the current config. |
mixer_config_template_config_errors_total | LastValue | The number of errors encountered during processing of the template configuration. |
mixer_config_template_configs_total | LastValue | The number of known templates in the current config. |
mixer_config_unsatisfied_action_handler_total | LastValue | The number of actions that failed due to handlers being unavailable. |
mixer_dispatcher_destinations_per_request | Distribution | Number of handlers dispatched per request by Mixer |
mixer_dispatcher_destinations_per_variety_total | LastValue | Number of Mixer adapter destinations by template variety type |
mixer_dispatcher_instances_per_request | Distribution | Number of instances created per request by Mixer |
mixer_handler_closed_handlers_total | LastValue | The number of handlers that were closed during config transition. |
mixer_handler_daemons_total | LastValue | The current number of active daemon routines in a given adapter environment. |
mixer_handler_handler_build_failures_total | LastValue | The number of handlers that failed creation during config transition. |
mixer_handler_handler_close_failures_total | LastValue | The number of errors encountered while closing handlers during config transition. |
mixer_handler_new_handlers_total | LastValue | The number of handlers that were newly created during config transition. |
mixer_handler_reused_handlers_total | LastValue | The number of handlers that were re-used during config transition. |
mixer_handler_workers_total | LastValue | The current number of active worker routines in a given adapter environment. |
mixer_runtime_dispatch_duration_seconds | Distribution | Duration in seconds for adapter dispatches handled by Mixer. |
mixer_runtime_dispatches_total | Count | Total number of adapter dispatches handled by Mixer. |
pilot_conflict_inbound_listener | LastValue | Number of conflicting inbound listeners. |
pilot_conflict_outbound_listener_http_over_current_tcp | LastValue | Number of conflicting wildcard http listeners with current wildcard tcp listener. |
pilot_conflict_outbound_listener_http_over_https | LastValue | Number of conflicting HTTP listeners with well known HTTPS ports |
pilot_conflict_outbound_listener_tcp_over_current_http | LastValue | Number of conflicting wildcard tcp listeners with current wildcard http listener. |
pilot_conflict_outbound_listener_tcp_over_current_tcp | LastValue | Number of conflicting tcp listeners with current tcp listener. |
pilot_destrule_subsets | LastValue | Duplicate subsets across destination rules for same host |
pilot_duplicate_envoy_clusters | LastValue | Duplicate envoy clusters caused by service entries with same hostname |
pilot_eds_no_instances | LastValue | Number of clusters without instances. |
pilot_endpoint_not_ready | LastValue | Endpoint found in unready state. |
pilot_inbound_updates | Sum | Total number of updates received by pilot. |
pilot_invalid_out_listeners | LastValue | Number of invalid outbound listeners. |
pilot_jwks_resolver_network_fetch_fail_total | Sum | Total number of failed network fetch by pilot jwks resolver |
pilot_jwks_resolver_network_fetch_success_total | Sum | Total number of successfully network fetch by pilot jwks resolver |
pilot_k8s_cfg_events | Sum | Events from k8s config. |
pilot_k8s_endpoints_with_no_pods | Sum | Endpoints that does not have any corresponding pods. |
pilot_k8s_object_errors | LastValue | Errors converting k8s CRDs |
pilot_k8s_reg_events | Sum | Events from k8s registry. |
pilot_no_ip | LastValue | Pods not found in the endpoint table, possibly invalid. |
pilot_proxy_convergence_time | Distribution | Delay in seconds between config change and a proxy receiving all required configuration. |
pilot_proxy_queue_time | Distribution | Time in seconds, a proxy is in the push queue before being dequeued. |
pilot_rds_expired_nonce | Sum | Total number of RDS messages with an expired nonce. |
pilot_services | LastValue | Total services known to pilot. |
pilot_total_rejected_configs | Sum | Total number of configs that Pilot had to reject or ignore. |
pilot_total_xds_internal_errors | Sum | Total number of internal XDS errors in pilot. |
pilot_total_xds_rejects | Sum | Total number of XDS responses from pilot rejected by proxy. |
pilot_virt_services | LastValue | Total virtual services known to pilot. |
pilot_vservice_dup_domain | LastValue | Virtual services with dup domains. |
pilot_xds | LastValue | Number of endpoints connected to this pilot using XDS. |
pilot_xds_cds_reject | LastValue | Pilot rejected CDS configs. |
pilot_xds_eds_all_locality_endpoints | LastValue | Network endpoints for each cluster(across all localities), as of last push. Zero endpoints is an error. |
pilot_xds_eds_instances | LastValue | Instances for each cluster(grouped by locality), as of last push. Zero instances is an error. |
pilot_xds_eds_reject | LastValue | Pilot rejected EDS. |
pilot_xds_lds_reject | LastValue | Pilot rejected LDS. |
pilot_xds_push_context_errors | Sum | Number of errors (timeouts) initiating push context. |
pilot_xds_push_time | Distribution | Total time in seconds Pilot takes to push lds, rds, cds and eds. |
pilot_xds_pushes | Sum | Pilot build and send errors for lds, rds, cds and eds. |
pilot_xds_rds_reject | LastValue | Pilot rejected RDS. |
pilot_xds_write_timeout | Sum | Pilot XDS response write timeouts. |
sidecar_injection_failure_total | Sum | Total number of failed Side car injection requests. |
sidecar_injection_requests_total | Sum | Total number of Side car injection requests. |
sidecar_injection_skip_total | Sum | Total number of skipped injection requests. |
sidecar_injection_success_total | Sum | Total number of successful Side car injection requests. |