Egress using Wildcard Hosts

The Control Egress Traffic task and the Configure an Egress Gateway example describe how to configure egress traffic for specific hostnames, like edition.cnn.com. This example shows how to enable egress traffic for a set of hosts in a common domain, for example *.wikipedia.org, instead of configuring each and every host separately.

Background

Suppose you want to enable egress traffic in Istio for the wikipedia.org sites in all languages. Each version of wikipedia.org in a particular language has its own hostname, e.g., en.wikipedia.org and de.wikipedia.org in the English and the German languages, respectively. You want to enable egress traffic by common configuration items for all the Wikipedia sites, without the need to specify every language’s site separately.

Before you begin

  • Setup Istio by following the instructions in the Installation guide.

  • Deploy the sleep sample app to use as a test source for sending requests. If you have automatic sidecar injection enabled, run the following command to deploy the sample app:

    Zip
    $ kubectl apply -f @samples/sleep/sleep.yaml@
    

    Otherwise, manually inject the sidecar before deploying the sleep application with the following command:

    Zip
    $ kubectl apply -f <(istioctl kube-inject -f @samples/sleep/sleep.yaml@)
    
  • Set the SOURCE_POD environment variable to the name of your source pod:

    $ export SOURCE_POD=$(kubectl get pod -l app=sleep -o jsonpath={.items..metadata.name})
    

Configure direct traffic to a wildcard host

The first, and simplest, way to access a set of hosts within a common domain is by configuring a simple ServiceEntry with a wildcard host and calling the services directly from the sidecar. When calling services directly (i.e., not via an egress gateway), the configuration for a wildcard host is no different than that of any other (e.g., fully qualified) host, only much more convenient when there are many hosts within the common domain.

  1. Define a ServiceEntry and corresponding VirtualSevice for *.wikipedia.org:

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: wikipedia
    spec:
      hosts:
      - "*.wikipedia.org"
      ports:
      - number: 443
        name: tls
        protocol: TLS
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: wikipedia
    spec:
      hosts:
      - "*.wikipedia.org"
      tls:
      - match:
        - port: 443
          sniHosts:
          - "*.wikipedia.org"
        route:
        - destination:
            host: "*.wikipedia.org"
            port:
              number: 443
    EOF
    
  2. Send HTTPS requests to https://en.wikipedia.org and https://de.wikipedia.org:

    $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    <title>Wikipedia, the free encyclopedia</title>
    <title>Wikipedia – Die freie Enzyklopädie</title>
    

Cleanup direct traffic to a wildcard host

$ kubectl delete serviceentry wikipedia
$ kubectl delete virtualservice wikipedia

Configure egress gateway traffic to a wildcard host

The configuration for accessing a wildcard host via an egress gateway depends on whether or not the set of wildcard domains are served by a single common host. This is the case for *.wikipedia.org. All of the language-specific sites are served by every one of the wikipedia.org servers. You can route the traffic to an IP of any *.wikipedia.org site, including www.wikipedia.org, and it will manage to serve any specific site.

In the general case, where all the domain names of a wildcard are not served by a single hosting server, a more complex configuration is required.

Wildcard configuration for a single hosting server

When all wildcard hosts are served by a single server, the configuration for egress gateway-based access to a wildcard host is very similar to that of any host, with one exception: the configured route destination will not be the same as the configured host, i.e., the wildcard. It will instead be configured with the host of the single server for the set of domains.

  1. Create an egress Gateway for *.wikipedia.org, a destination rule and a virtual service to direct the traffic through the egress gateway and from the egress gateway to the external service.

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
      name: istio-egressgateway
    spec:
      selector:
        istio: egressgateway
      servers:
      - port:
          number: 443
          name: tls
          protocol: TLS
        hosts:
        - "*.wikipedia.org"
        tls:
          mode: PASSTHROUGH
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: egressgateway-for-wikipedia
    spec:
      host: istio-egressgateway.istio-system.svc.cluster.local
      subsets:
        - name: wikipedia
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: direct-wikipedia-through-egress-gateway
    spec:
      hosts:
      - "*.wikipedia.org"
      gateways:
      - mesh
      - istio-egressgateway
      tls:
      - match:
        - gateways:
          - mesh
          port: 443
          sniHosts:
          - "*.wikipedia.org"
        route:
        - destination:
            host: istio-egressgateway.istio-system.svc.cluster.local
            subset: wikipedia
            port:
              number: 443
          weight: 100
      - match:
        - gateways:
          - istio-egressgateway
          port: 443
          sniHosts:
          - "*.wikipedia.org"
        route:
        - destination:
            host: www.wikipedia.org
            port:
              number: 443
          weight: 100
    EOF
    
  2. Create a ServiceEntry for the destination server, www.wikipedia.org.

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: www-wikipedia
    spec:
      hosts:
      - www.wikipedia.org
      ports:
      - number: 443
        name: tls
        protocol: TLS
      resolution: DNS
    EOF
    
  3. Send HTTPS requests to https://en.wikipedia.org and https://de.wikipedia.org:

    $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    <title>Wikipedia, the free encyclopedia</title>
    <title>Wikipedia – Die freie Enzyklopädie</title>
    
  4. Check the statistics of the egress gateway’s proxy for the counter that corresponds to your requests to *.wikipedia.org. If Istio is deployed in the istio-system namespace, the command to print the counter is:

    $ kubectl exec -it $(kubectl get pod -l istio=egressgateway -n istio-system -o jsonpath='{.items[0].metadata.name}') -c istio-proxy -n istio-system -- pilot-agent request GET clusters | grep '^outbound|443||www.wikipedia.org.*cx_total:'
    outbound|443||www.wikipedia.org::208.80.154.224:443::cx_total::2
    

Cleanup wildcard configuration for a single hosting server

$ kubectl delete serviceentry www-wikipedia
$ kubectl delete gateway istio-egressgateway
$ kubectl delete virtualservice direct-wikipedia-through-egress-gateway
$ kubectl delete destinationrule egressgateway-for-wikipedia

Wildcard configuration for arbitrary domains

The configuration in the previous section worked because all the *.wikipedia.org sites can be served by any one of the wikipedia.org servers. However, this is not always the case. For example, you may want to configure egress control for access to more general wildcard domains like *.com or *.org.

Configuring traffic to arbitrary wildcard domains introduces a challenge for Istio gateways. In the previous section you directed the traffic to www.wikipedia.org, which was made known to your gateway during configuration. The gateway, however, would not know the IP address of any arbitrary host it receives in a request. This is due to a limitation of Envoy, the proxy used by the default Istio egress gateway. Envoy routes traffic either to predefined hosts, predefined IP addresses, or to the original destination IP address of the request. In the gateway case, the original destination IP of the request is lost since the request is first routed to the egress gateway and its destination IP address is the IP address of the gateway.

Consequently, the Istio gateway based on Envoy cannot route traffic to an arbitrary host that is not preconfigured, and therefore is unable to perform traffic control for arbitrary wildcard domains. To enable such traffic control for HTTPS, and for any TLS, you need to deploy an SNI forward proxy in addition to Envoy. Envoy will route the requests destined for a wildcard domain to the SNI forward proxy, which, in turn, will forward the requests to the destination specified by the SNI value.

The egress gateway with SNI proxy and the related parts of the Istio architecture are shown in the following diagram:

Egress Gateway with SNI proxy
Egress Gateway with SNI proxy

The following sections show you how to redeploy the egress gateway with an SNI proxy and then configure Istio to route HTTPS traffic through the gateway to arbitrary wildcard domains.

Setup egress gateway with SNI proxy

In this section you deploy an egress gateway with an SNI proxy in addition to the standard Istio Envoy proxy. This example uses Nginx for the SNI proxy, although any SNI proxy that is capable of routing traffic according to arbitrary, not-preconfigured, SNI values would do. The SNI proxy will listen on port 8443, although you can use any port other than the ports specified for the egress Gateway and for the VirtualServices bound to it. The SNI proxy will forward the traffic to port 443.

  1. Create a configuration file for the Nginx SNI proxy. You may want to edit the file to specify additional Nginx settings, if required. Note that the listen directive of the server specifies port 8443, its proxy_pass directive uses ssl_preread_server_name with port 443 and ssl_preread is on to enable SNI reading.

    $ cat <<EOF > ./sni-proxy.conf
    user www-data;
    
    events {
    }
    
    stream {
      log_format log_stream '\$remote_addr [\$time_local] \$protocol [\$ssl_preread_server_name]'
      '\$status \$bytes_sent \$bytes_received \$session_time';
    
      access_log /var/log/nginx/access.log log_stream;
      error_log  /var/log/nginx/error.log;
    
      # tcp forward proxy by SNI
      server {
        resolver 8.8.8.8 ipv6=off;
        listen       127.0.0.1:8443;
        proxy_pass   \$ssl_preread_server_name:443;
        ssl_preread  on;
      }
    }
    EOF
    
  2. Create a Kubernetes ConfigMap to hold the configuration of the Nginx SNI proxy:

    $ kubectl create configmap egress-sni-proxy-configmap -n istio-system --from-file=nginx.conf=./sni-proxy.conf
    
  3. The following command will generate istio-egressgateway-with-sni-proxy.yaml which you can optionally edit and then deploy.

    $ cat <<EOF | istioctl manifest generate --set values.global.istioNamespace=istio-system -f - > ./istio-egressgateway-with-sni-proxy.yaml
    gateways:
      enabled: true
      istio-ingressgateway:
        enabled: false
      istio-egressgateway:
        enabled: false
      istio-egressgateway-with-sni-proxy:
        enabled: true
        labels:
          app: istio-egressgateway-with-sni-proxy
          istio: egressgateway-with-sni-proxy
        replicaCount: 1
        autoscaleMin: 1
        autoscaleMax: 5
        cpu:
          targetAverageUtilization: 80
        serviceAnnotations: {}
        type: ClusterIP
        ports:
          - port: 443
            name: https
        secretVolumes:
          - name: egressgateway-certs
            secretName: istio-egressgateway-certs
            mountPath: /etc/istio/egressgateway-certs
          - name: egressgateway-ca-certs
            secretName: istio-egressgateway-ca-certs
            mountPath: /etc/istio/egressgateway-ca-certs
        configVolumes:
          - name: sni-proxy-config
            configMapName: egress-sni-proxy-configmap
        additionalContainers:
        - name: sni-proxy
          image: nginx
          volumeMounts:
          - name: sni-proxy-config
            mountPath: /etc/nginx
            readOnly: true
    EOF
    
  4. Deploy the new egress gateway:

    $ kubectl apply -f ./istio-egressgateway-with-sni-proxy.yaml
    serviceaccount "istio-egressgateway-with-sni-proxy-service-account" created
    role "istio-egressgateway-with-sni-proxy-istio-system" created
    rolebinding "istio-egressgateway-with-sni-proxy-istio-system" created
    service "istio-egressgateway-with-sni-proxy" created
    deployment "istio-egressgateway-with-sni-proxy" created
    horizontalpodautoscaler "istio-egressgateway-with-sni-proxy" created
    
  5. Verify that the new egress gateway is running. Note that the pod has two containers (one is the Envoy proxy and the second one is the SNI proxy).

    $ kubectl get pod -l istio=egressgateway-with-sni-proxy -n istio-system
    NAME                                                  READY     STATUS    RESTARTS   AGE
    istio-egressgateway-with-sni-proxy-79f6744569-pf9t2   2/2       Running   0          17s
    
  6. Create a service entry with a static address equal to 127.0.0.1 (localhost), and disable mutual TLS for traffic directed to the new service entry:

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: sni-proxy
    spec:
      hosts:
      - sni-proxy.local
      location: MESH_EXTERNAL
      ports:
      - number: 8443
        name: tcp
        protocol: TCP
      resolution: STATIC
      endpoints:
      - address: 127.0.0.1
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: disable-mtls-for-sni-proxy
    spec:
      host: sni-proxy.local
      trafficPolicy:
        tls:
          mode: DISABLE
    EOF
    

Configure traffic through egress gateway with SNI proxy

  1. Define a ServiceEntry for *.wikipedia.org:

    $ cat <<EOF | kubectl create -f -
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: wikipedia
    spec:
      hosts:
      - "*.wikipedia.org"
      ports:
      - number: 443
        name: tls
        protocol: TLS
    EOF
    
  2. Create an egress Gateway for *.wikipedia.org, port 443, protocol TLS, and a virtual service to direct the traffic destined for *.wikipedia.org through the gateway.

    Choose the instructions corresponding to whether or not you want to enable mutual TLS Authentication between the source pod and the egress gateway.

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
      name: istio-egressgateway-with-sni-proxy
    spec:
      selector:
    istio: egressgateway-with-sni-proxy
      servers:
      - port:
      number: 443
      name: tls-egress
      protocol: TLS
    hosts:
    - "*.wikipedia.org"
    tls:
      mode: MUTUAL
      serverCertificate: /etc/certs/cert-chain.pem
      privateKey: /etc/certs/key.pem
      caCertificates: /etc/certs/root-cert.pem
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: egressgateway-for-wikipedia
    spec:
      host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
      subsets:
    - name: wikipedia
      trafficPolicy:
        loadBalancer:
          simple: ROUND_ROBIN
        portLevelSettings:
        - port:
            number: 443
          tls:
            mode: ISTIO_MUTUAL
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: direct-wikipedia-through-egress-gateway
    spec:
      hosts:
      - "*.wikipedia.org"
      gateways:
      - mesh
      - istio-egressgateway-with-sni-proxy
      tls:
      - match:
    - gateways:
      - mesh
      port: 443
      sniHosts:
      - "*.wikipedia.org"
    route:
    - destination:
        host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
        subset: wikipedia
        port:
          number: 443
      weight: 100
      tcp:
      - match:
    - gateways:
      - istio-egressgateway-with-sni-proxy
      port: 443
    route:
    - destination:
        host: sni-proxy.local
        port:
          number: 8443
      weight: 100
    ---
    # The following filter is used to forward the original SNI (sent by the application) as the SNI of the mutual TLS
    # connection.
    # The forwarded SNI will be reported to Mixer so that policies will be enforced based on the original SNI value.
    apiVersion: networking.istio.io/v1alpha3
    kind: EnvoyFilter
    metadata:
      name: forward-downstream-sni
    spec:
      filters:
      - listenerMatch:
      portNumber: 443
      listenerType: SIDECAR_OUTBOUND
    filterName: forward_downstream_sni
    filterType: NETWORK
    filterConfig: {}
    ---
    # The following filter verifies that the SNI of the mutual TLS connection (the SNI reported to Mixer) is
    # identical to the original SNI issued by the application (the SNI used for routing by the SNI proxy).
    # The filter prevents Mixer from being deceived by a malicious application: routing to one SNI while
    # reporting some other value of SNI. If the original SNI does not match the SNI of the mutual TLS connection, the
    # filter will block the connection to the external service.
    apiVersion: networking.istio.io/v1alpha3
    kind: EnvoyFilter
    metadata:
      name: egress-gateway-sni-verifier
    spec:
      workloadLabels:
    app: istio-egressgateway-with-sni-proxy
      filters:
      - listenerMatch:
      portNumber: 443
      listenerType: GATEWAY
    filterName: sni_verifier
    filterType: NETWORK
    filterConfig: {}
    EOF
    
  3. Send HTTPS requests to https://en.wikipedia.org and https://de.wikipedia.org:

    $ kubectl exec -it $SOURCE_POD -c sleep -- sh -c 'curl -s https://en.wikipedia.org/wiki/Main_Page | grep -o "<title>.*</title>"; curl -s https://de.wikipedia.org/wiki/Wikipedia:Hauptseite | grep -o "<title>.*</title>"'
    <title>Wikipedia, the free encyclopedia</title>
    <title>Wikipedia – Die freie Enzyklopädie</title>
    
  4. Check the log of the egress gateway’s Envoy proxy. If Istio is deployed in the istio-system namespace, the command to print the log is:

    $ kubectl logs -l istio=egressgateway-with-sni-proxy -c istio-proxy -n istio-system
    

    You should see lines similar to the following:

    [2019-01-02T16:34:23.312Z] "- - -" 0 - 578 79141 624 - "-" "-" "-" "-" "127.0.0.1:8443" outbound|8443||sni-proxy.local 127.0.0.1:55018 172.30.109.84:443 172.30.109.112:45346 en.wikipedia.org
    [2019-01-02T16:34:24.079Z] "- - -" 0 - 586 65770 638 - "-" "-" "-" "-" "127.0.0.1:8443" outbound|8443||sni-proxy.local 127.0.0.1:55034 172.30.109.84:443 172.30.109.112:45362 de.wikipedia.org
    
  5. Check the logs of the SNI proxy. If Istio is deployed in the istio-system namespace, the command to print the log is:

    $ kubectl logs -l istio=egressgateway-with-sni-proxy -n istio-system -c sni-proxy
    127.0.0.1 [01/Aug/2018:15:32:02 +0000] TCP [en.wikipedia.org]200 81513 280 0.600
    127.0.0.1 [01/Aug/2018:15:32:03 +0000] TCP [de.wikipedia.org]200 67745 291 0.659
    

Cleanup wildcard configuration for arbitrary domains

  1. Delete the configuration items for *.wikipedia.org:

    $ kubectl delete serviceentry wikipedia
    $ kubectl delete gateway istio-egressgateway-with-sni-proxy
    $ kubectl delete virtualservice direct-wikipedia-through-egress-gateway
    $ kubectl delete destinationrule egressgateway-for-wikipedia
    $ kubectl delete --ignore-not-found=true envoyfilter forward-downstream-sni egress-gateway-sni-verifier
    
  2. Delete the configuration items for the egressgateway-with-sni-proxy deployment:

    $ kubectl delete serviceentry sni-proxy
    $ kubectl delete destinationrule disable-mtls-for-sni-proxy
    $ kubectl delete -f ./istio-egressgateway-with-sni-proxy.yaml
    $ kubectl delete configmap egress-sni-proxy-configmap -n istio-system
    
  3. Remove the configuration files you created:

    $ rm ./istio-egressgateway-with-sni-proxy.yaml
    $ rm ./sni-proxy.conf
    

Cleanup

Shutdown the sleep service:

Zip
$ kubectl delete -f @samples/sleep/sleep.yaml@
Was this information useful?
Do you have any suggestions for improvement?

Thanks for your feedback!