Mixer Client

11 minutos lidos

Describes the configuration state for the Mixer client library that’s built into Envoy.

APIKey

APIKey defines the explicit configuration for generating the request.api_key attribute from HTTP requests.

See API Keys for a general overview of API keys as defined by OpenAPI.

Field Type Description Required

Field	Type	Description	Required
`query`	`string (oneof)`	API Key is sent as a query parameter. `query` represents the query string parameter name. For example, `query=api_key` should be used with the following request: `GET /something?api_key=abcdef12345`	Yes
`header`	`string (oneof)`	API key is sent in a request header. `header` represents the header name. For example, `header=X-API-KEY` should be used with the following request: `GET /something HTTP/1.1 X-API-Key: abcdef12345`	Yes
`cookie`	`string (oneof)`	API key is sent in a cookie, For example, `cookie=X-API-KEY` should be used for the following request: `GET /something HTTP/1.1 Cookie: X-API-KEY=abcdef12345`	Yes

query

string (oneof)

API Key is sent as a query parameter. query represents the query string parameter name.

For example, query=api_key should be used with the following request:

GET /something?api_key=abcdef12345

Yes

header

string (oneof)

API key is sent in a request header. header represents the header name.

For example, header=X-API-KEY should be used with the following request:

GET /something HTTP/1.1
X-API-Key: abcdef12345

Yes

cookie

string (oneof)

API key is sent in a cookie,

For example, cookie=X-API-KEY should be used for the following request:

GET /something HTTP/1.1
Cookie: X-API-KEY=abcdef12345

Yes

AttributeMatch

Specifies a match clause to match Istio attributes

Field Type Description Required

Field	Type	Description	Required
`clause`	`map<string, StringMatch>`	Map of attribute names to StringMatch type. Each map element specifies one condition to match. Example: clause: source.uid: exact: SOURCEUID request.httpmethod: exact: POST	No

clause

map<string, StringMatch>

Map of attribute names to StringMatch type. Each map element specifies one condition to match.

Example:

clause: source.uid: exact: SOURCEUID request.httpmethod: exact: POST

HTTPAPISpec

HTTPAPISpec defines the canonical configuration for generating API-related attributes from HTTP requests based on the method and uri templated path matches. It is sufficient for defining the API surface of a service for the purposes of API attribute generation. It is not intended to represent auth, quota, documentation, or other information commonly found in other API specifications, e.g. OpenAPI.

Existing standards that define operations (or methods) in terms of HTTP methods and paths can be normalized to this format for use in Istio. For example, a simple petstore API described by OpenAPIv2 here can be represented with the following HTTPAPISpec.

apiVersion: config.istio.io/v1alpha2
kind: HTTPAPISpec
metadata:
  name: petstore
  namespace: default
spec:
  attributes:
    attributes:
      api.service:
        stringValue: petstore.swagger.io
      api.version:
        stringValue: 1.0.0
  patterns:
  - attributes:
      attributes:
        api.operation:
          stringValue: findPets
    httpMethod: GET
    uriTemplate: /api/pets
  - attributes:
      attributes:
        api.operation:
          stringValue: addPet
    httpMethod: POST
    uriTemplate: /api/pets
  - attributes:
      attributes:
        api.operation:
          stringValue: findPetById
    httpMethod: GET
    uriTemplate: /api/pets/{id}
  - attributes:
      attributes:
        api.operation:
          stringValue: deletePet
    httpMethod: DELETE
    uriTemplate: /api/pets/{id}
  apiKeys:
  - query: api-key

Field Type Description Required

Field	Type	Description	Required
`attributes`	`Attributes`	List of attributes that are generated when any of the HTTP patterns match. This list typically includes the “api.service” and “api.version” attributes.	No
`patterns`	`HTTPAPISpecPattern[]`	List of HTTP patterns to match.	No
`apiKeys`	`APIKey[]`	List of APIKey that describes how to extract an API-KEY from an HTTP request. The first API-Key match found in the list is used, i.e. ‘OR’ semantics. The following default policies are used to generate the `request.api_key` attribute if no explicit APIKey is defined. `query: key, `query: api_key`, and then `header: x-api-key`	No

attributes

Attributes

List of attributes that are generated when any of the HTTP patterns match. This list typically includes the “api.service” and “api.version” attributes.

patterns

HTTPAPISpecPattern[]

List of HTTP patterns to match.

apiKeys

APIKey[]

List of APIKey that describes how to extract an API-KEY from an HTTP request. The first API-Key match found in the list is used, i.e. ‘OR’ semantics.

The following default policies are used to generate the request.api_key attribute if no explicit APIKey is defined.

`query: key, `query: api_key`, and then `header: x-api-key`

HTTPAPISpecBinding

HTTPAPISpecBinding defines the binding between HTTPAPISpecs and one or more IstioService. For example, the following establishes a binding between the HTTPAPISpec petstore and service foo in namespace bar.

apiVersion: config.istio.io/v1alpha2
kind: HTTPAPISpecBinding
metadata:
  name: my-binding
  namespace: default
spec:
  services:
  - name: foo
    namespace: bar
  apiSpecs:
  - name: petstore
    namespace: default

Field	Type	Description	Required
`services`	`IstioService[]`	One or more services to map the listed HTTPAPISpec onto.	Yes
`apiSpecs`	`HTTPAPISpecReference[]`	One or more HTTPAPISpec references that should be mapped to the specified service(s). The aggregate collection of match conditions defined in the HTTPAPISpecs should not overlap.	Yes

HTTPAPISpecPattern

HTTPAPISpecPattern defines a single pattern to match against incoming HTTP requests. The per-pattern list of attributes is generated if both the httpmethod and uritemplate match. In addition, the top-level list of attributes in the HTTPAPISpec is also generated.

pattern:
- attributes
    api.operation: doFooBar
  httpMethod: GET
  uriTemplate: /foo/bar

Field	Type	Description	Required
`attributes`	`Attributes`	List of attributes that are generated if the HTTP request matches the specified httpmethod and uritemplate. This typically includes the “api.operation” attribute.	No
`httpMethod`	`string`	HTTP request method to match against as defined by rfc7231. For example: GET, HEAD, POST, PUT, DELETE.	No
`uriTemplate`	`string (oneof)`	URI template to match against as defined by rfc6570. For example, the following are valid URI templates: `/pets /pets/{id} /dictionary/{term:1}/{term} /search{?q*,lang}`	Yes
`regex`	`string (oneof)`	EXPERIMENTAL: ecmascript style regex-based match as defined by EDCA-262. For example, `"^/pets/(.*?)?"`	Yes

HTTPAPISpecReference

HTTPAPISpecReference defines a reference to an HTTPAPISpec. This is typically used for establishing bindings between an HTTPAPISpec and an IstioService. For example, the following defines an HTTPAPISpecReference for service foo in namespace bar.

- name: foo
  namespace: bar

Field	Type	Description	Required
`name`	`string`	The short name of the HTTPAPISpec. This is the resource name defined by the metadata name field.	Yes
`namespace`	`string`	Optional namespace of the HTTPAPISpec. Defaults to the encompassing HTTPAPISpecBinding’s metadata namespace field.	No

HttpClientConfig

Defines the client config for HTTP.

Field	Type	Description	Required
`transport`	`TransportConfig`	The transport config.	No
`serviceConfigs`	`map<string, ServiceConfig>`	Map of control configuration indexed by destination.service. This is used to support per-service configuration for cases where a mixerclient serves multiple services.	No
`defaultDestinationService`	`string`	Default destination service name if none was specified in the client request.	No
`mixerAttributes`	`Attributes`	Default attributes to send to Mixer in both Check and Report. This typically includes “destination.ip” and “destination.uid” attributes.	No
`forwardAttributes`	`Attributes`	Default attributes to forward to upstream. This typically includes the “source.ip” and “source.uid” attributes.	No
`ignoreForwardedAttributes`	`bool`	Whether or not to use attributes forwarded in the request headers to create the attribute bag to send to mixer. For intra-mesh traffic, this should be set to “false”. For ingress/egress gateways, this should be set to “true”.	No

IstioService

IstioService identifies a service and optionally service version. The FQDN of the service is composed from the name, namespace, and implementation-specific domain suffix (e.g. on Kubernetes, “reviews” + “default” + “svc.cluster.local” -> “reviews.default.svc.cluster.local”).

Field	Type	Description	Required
`name`	`string`	The short name of the service such as “foo”.	No
`namespace`	`string`	Optional namespace of the service. Defaults to value of metadata namespace field.	No
`domain`	`string`	Domain suffix used to construct the service FQDN in implementations that support such specification.	No
`service`	`string`	The service FQDN.	No
`labels`	`map<string, string>`	Optional one or more labels that uniquely identify the service version. Note: When used for a VirtualService destination, labels MUST be empty.	No

NetworkFailPolicy

Specifies the behavior when the client is unable to connect to Mixer.

Field	Type	Description	Required
`policy`	`FailPolicy`	Specifies the behavior when the client is unable to connect to Mixer.	No
`maxRetry`	`uint32`	Max retries on transport error.	No
`baseRetryWait`	`Duration`	Base time to wait between retries. Will be adjusted by exponential backoff and jitter.	No
`maxRetryWait`	`Duration`	Max time to wait between retries.	No

NetworkFailPolicy.FailPolicy

Describes the policy.

Name	Description
`FAIL_OPEN`	If network connection fails, request is allowed and delivered to the service.
`FAIL_CLOSE`	If network connection fails, request is rejected.

Quota

Specifies a quota to use with quota name and amount.

Field	Type	Description	Required
`quota`	`string`	The quota name to charge	No
`charge`	`int32`	The quota amount to charge	No

QuotaRule

Specifies a rule with list of matches and list of quotas. If any clause matched, the list of quotas will be used.

Field	Type	Description	Required
`match`	`AttributeMatch[]`	If empty, match all request. If any of match is true, it is matched.	No
`quotas`	`Quota[]`	The list of quotas to charge.	No

QuotaSpec

Determines the quotas used for individual requests.

Field	Type	Description	Required
`rules`	`QuotaRule[]`	A list of Quota rules.	No

QuotaSpecBinding

QuotaSpecBinding defines the binding between QuotaSpecs and one or more IstioService.

Field	Type	Description	Required
`services`	`IstioService[]`	One or more services to map the listed QuotaSpec onto.	Yes
`quotaSpecs`	`QuotaSpecReference[]`	One or more QuotaSpec references that should be mapped to the specified service(s). The aggregate collection of match conditions defined in the QuotaSpecs should not overlap.	Yes

QuotaSpecBinding.QuotaSpecReference

QuotaSpecReference uniquely identifies the QuotaSpec used in the Binding.

Field	Type	Description	Required
`name`	`string`	The short name of the QuotaSpec. This is the resource name defined by the metadata name field.	Yes
`namespace`	`string`	Optional namespace of the QuotaSpec. Defaults to the value of the metadata namespace field.	No

ServiceConfig

Defines the per-service client configuration.

Field	Type	Description	Required
`disableCheckCalls`	`bool`	If true, do not call Mixer Check.	No
`disableReportCalls`	`bool`	If true, do not call Mixer Report.	No
`mixerAttributes`	`Attributes`	Send these attributes to Mixer in both Check and Report. This typically includes the “destination.service” attribute. In case of a per-route override, per-route attributes take precedence over the attributes supplied in the client configuration.	No
`httpApiSpec`	`HTTPAPISpec[]`	HTTP API specifications to generate API attributes.	No
`quotaSpec`	`QuotaSpec[]`	Quota specifications to generate quota requirements.	No
`networkFailPolicy`	`NetworkFailPolicy`	Specifies the behavior when the client is unable to connect to Mixer. This is the service-level policy. It overrides [mesh-level policy][istio.mixer.v1.config.client.TransportConfig.networkfailpolicy].	No
`forwardAttributes`	`Attributes`	Default attributes to forward to upstream. This typically includes the “source.ip” and “source.uid” attributes. In case of a per-route override, per-route attributes take precedence over the attributes supplied in the client configuration. Forwarded attributes take precedence over the static Mixer attributes, except in cases where there is clear configuration to ignore forwarded attributes. Gateways, for instance, should never use forwarded attributes. The full order of application is as follows: 1. static Mixer attributes from the filter config; 2. static Mixer attributes from the route config; 3. forwarded attributes from the source filter config (if any and not ignored); 4. forwarded attributes from the source route config (if any and not ignored); 5. derived attributes from the request metadata.	No

StringMatch

Describes how to match a given string in HTTP headers. Match is case-sensitive.

Field	Type	Description	Required
`exact`	`string (oneof)`	exact string match	Yes
`prefix`	`string (oneof)`	prefix-based match	Yes
`regex`	`string (oneof)`	ECMAscript style regex-based match	Yes

TcpClientConfig

Defines the client config for TCP.

Field	Type	Description	Required
`transport`	`TransportConfig`	The transport config.	No
`mixerAttributes`	`Attributes`	Default attributes to send to Mixer in both Check and Report. This typically includes “destination.ip” and “destination.uid” attributes.	No
`disableCheckCalls`	`bool`	If set to true, disables Mixer check calls.	No
`disableReportCalls`	`bool`	If set to true, disables Mixer check calls.	No
`connectionQuotaSpec`	`QuotaSpec`	Quota specifications to generate quota requirements. It applies on the new TCP connections.	No
`reportInterval`	`Duration`	Specify report interval to send periodical reports for long TCP connections. If not specified, the interval is 10 seconds. This interval should not be less than 1 second, otherwise it will be reset to 1 second.	No

TransportConfig

Defines the transport config on how to call Mixer.

Field	Type	Description	Required
`disableCheckCache`	`bool`	The flag to disable check cache.	No
`disableQuotaCache`	`bool`	The flag to disable quota cache.	No
`disableReportBatch`	`bool`	The flag to disable report batch.	No
`networkFailPolicy`	`NetworkFailPolicy`	Specifies the behavior when the client is unable to connect to Mixer. This is the mesh level policy. The default value for policy is FAIL_OPEN.	No
`statsUpdateInterval`	`Duration`	Specify refresh interval to write Mixer client statistics to Envoy share memory. If not specified, the interval is 10 seconds.	No
`checkCluster`	`string`	Name of the cluster that will forward check calls to a pool of mixer servers. Defaults to “mixer_server”. By using different names for checkCluster and reportCluster, it is possible to have one set of Mixer servers handle check calls, while another set of Mixer servers handle report calls. NOTE: Any value other than the default “mixer_server” will require the Istio Grafana dashboards to be reconfigured to use the new name.	No
`reportCluster`	`string`	Name of the cluster that will forward report calls to a pool of mixer servers. Defaults to “mixer_server”. By using different names for checkCluster and reportCluster, it is possible to have one set of Mixer servers handle check calls, while another set of Mixer servers handle report calls. NOTE: Any value other than the default “mixer_server” will require the Istio Grafana dashboards to be reconfigured to use the new name.	No
`attributesForMixerProxy`	`Attributes`	Default attributes to forward to Mixer upstream. This typically includes the “source.ip” and “source.uid” attributes. These attributes are consumed by the proxy in front of mixer.	No
`reportBatchMaxEntries`	`uint32`	When disablereportbatch is false, this value specifies the maximum number of requests that are batched in report. If left unspecified, the default value of reportbatchmax_entries == 0 will use the hardcoded defaults of istio::mixerclient::ReportOptions.	No
`reportBatchMaxTime`	`Duration`	When disablereportbatch is false, this value specifies the maximum elapsed time a batched report will be sent after a user request is processed. If left unspecified, the default reportbatchmax_time == 0 will use the hardcoded defaults of istio::mixerclient::ReportOptions.	No

istio.mixer.v1.Attributes

Attributes represents a set of typed name/value pairs. Many of Mixer’s API either consume and/or return attributes.

Istio uses attributes to control the runtime behavior of services running in the service mesh. Attributes are named and typed pieces of metadata describing ingress and egress traffic and the environment this traffic occurs in. An Istio attribute carries a specific piece of information such as the error code of an API request, the latency of an API request, or the original IP address of a TCP connection. For example:

request.path: xyz/abc
request.size: 234
request.time: 12:34:56.789 04/17/2017
source.ip: 192.168.0.1
target.service: example

A given Istio deployment has a fixed vocabulary of attributes that it understands. The specific vocabulary is determined by the set of attribute producers being used in the deployment. The primary attribute producer in Istio is Envoy, although specialized Mixer adapters and services can also generate attributes.

The common baseline set of attributes available in most Istio deployments is defined here.

Attributes are strongly typed. The supported attribute types are defined by ValueType. Each type of value is encoded into one of the so-called transport types present in this message.

Defines a map of attributes in uncompressed format. Following places may use this message: 1) Configure Istio/Proxy with static per-proxy attributes, such as source.uid. 2) Service IDL definition to extract api attributes for active requests. 3) Forward attributes from client proxy to server proxy for HTTP requests.

Field	Type	Description	Required
`attributes`	`map<string, AttributeValue>`	A map of attribute name to its value.	No

Esta informação foi útil?

Você tem alguma sugestão de melhoria?

Obrigado pelo seu feedback!