Consuming External MongoDB Services

Istio Egress Control Options for MongoDB traffic

Por Vadim Eisenberg | 16 de janeiro de 2018 (atualizado em 12 de janeiro de 2019) | 22 minutos lidos

In the Consuming External TCP Services blog post, I described how external services can be consumed by in-mesh Istio applications via TCP. In this post, I demonstrate consuming external MongoDB services. You use the Istio Bookinfo sample application, the version in which the book ratings data is persisted in a MongoDB database. You deploy this database outside the cluster and configure the ratings microservice to use it. You will learn multiple options of controlling traffic to external MongoDB services and their pros and cons.

Bookinfo with external ratings database

First, you set up a MongoDB database instance to hold book ratings data outside of your Kubernetes cluster. Then you modify the Bookinfo sample application to use your database.

Setting up the ratings database

For this task you set up an instance of MongoDB. You can use any MongoDB instance; I used Compose for MongoDB.

Set an environment variable for the password of your admin user. To prevent the password from being preserved in the Bash history, remove the command from the history immediately after running the command, using history -d.
```
$ export MONGO_ADMIN_PASSWORD=<your MongoDB admin password>
```
Set an environment variable for the password of the new user you will create, namely bookinfo. Remove the command from the history using history -d.
```
$ export BOOKINFO_PASSWORD=<password>
```
Set environment variables for your MongoDB service, MONGODB_HOST and MONGODB_PORT.

Create the bookinfo user:

$ cat <<EOF | mongo --ssl --sslAllowInvalidCertificates $MONGODB_HOST:$MONGODB_PORT -u admin -p $MONGO_ADMIN_PASSWORD --authenticationDatabase admin
use test
db.createUser(
   {
     user: "bookinfo",
     pwd: "$BOOKINFO_PASSWORD",
     roles: [ "read"]
   }
);
EOF

Create a collection to hold ratings. The following command sets both ratings to be equal 1 to provide a visual clue when your database is used by the Bookinfo ratings service (the default Bookinfo ratings are 4 and 5).

$ cat <<EOF | mongo --ssl --sslAllowInvalidCertificates $MONGODB_HOST:$MONGODB_PORT -u admin -p $MONGO_ADMIN_PASSWORD --authenticationDatabase admin
use test
db.createCollection("ratings");
db.ratings.insert(
  [{rating: 1},
   {rating: 1}]
);
EOF

Check that bookinfo user can get ratings:

$ cat <<EOF | mongo --ssl --sslAllowInvalidCertificates $MONGODB_HOST:$MONGODB_PORT -u bookinfo -p $BOOKINFO_PASSWORD --authenticationDatabase test
use test
db.ratings.find({});
EOF

The output should be similar to:

MongoDB server version: 3.4.10
switched to db test
{ "_id" : ObjectId("5b7c29efd7596e65b6ed2572"), "rating" : 1 }
{ "_id" : ObjectId("5b7c29efd7596e65b6ed2573"), "rating" : 1 }
bye

Initial setting of Bookinfo application

To demonstrate the scenario of using an external database, you start with a Kubernetes cluster with Istio installed. Then you deploy the Istio Bookinfo sample application, apply the default destination rules, and change Istio to the blocking-egress-by-default policy.

This application uses the ratings microservice to fetch book ratings, a number between 1 and 5. The ratings are displayed as stars for each review. There are several versions of the ratings microservice. You will deploy the version that uses MongoDB as the ratings database in the next subsection.

The example commands in this blog post work with Istio 1.0.

As a reminder, here is the end-to-end architecture of the application from the Bookinfo sample application.

Use the external database in Bookinfo application

Deploy the spec of the ratings microservice that uses a MongoDB database (ratings v2):

$ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo-ratings-v2.yaml@
serviceaccount "bookinfo-ratings-v2" created
deployment "ratings-v2" created

Update the MONGO_DB_URL environment variable to the value of your MongoDB:

$ kubectl set env deployment/ratings-v2 "MONGO_DB_URL=mongodb://bookinfo:$BOOKINFO_PASSWORD@$MONGODB_HOST:$MONGODB_PORT/test?authSource=test&ssl=true"
deployment.extensions/ratings-v2 env updated

Route all the traffic destined to the reviews service to its v3 version. You do this to ensure that the reviews service always calls the ratings service. In addition, route all the traffic destined to the ratings service to ratings v2 that uses your database.
Specify the routing for both services above by adding two virtual services. These virtual services are specified in samples/bookinfo/networking/virtual-service-ratings-mongodb.yaml of an Istio release archive. Important: make sure you applied the default destination rules before running the following command.
Zip
```
$ kubectl apply -f @samples/bookinfo/networking/virtual-service-ratings-db.yaml@
```

The updated architecture appears below. Note that the blue arrows inside the mesh mark the traffic configured according to the virtual services we added. According to the virtual services, the traffic is sent to reviews v3 and ratings v2.

The Bookinfo application with ratings v2 and an external MongoDB database

Note that the MongoDB database is outside the Istio service mesh, or more precisely outside the Kubernetes cluster. The boundary of the service mesh is marked by a dashed line.

Access the webpage

Access the webpage of the application, after determining the ingress IP and port.

Since you did not configure the egress traffic control yet, the access to the MongoDB service is blocked by Istio. This is why instead of the rating stars, the message “Ratings service is currently unavailable” is currently displayed below each review:

In the following sections you will configure egress access to the external MongoDB service, using different options for egress control in Istio.

Egress control for TCP

Since MongoDB Wire Protocol runs on top of TCP, you can control the egress traffic to your MongoDB as traffic to any other external TCP service. To control TCP traffic, a block of IPs in the CIDR notation that includes the IP address of your MongoDB host must be specified. The caveat here is that sometimes the IP of the MongoDB host is not stable or known in advance.

In the cases when the IP of the MongoDB host is not stable, the egress traffic can either be controlled as TLS traffic, or the traffic can be routed directly, bypassing the Istio sidecar proxies.

Get the IP address of your MongoDB database instance. As an option, you can use the host command:

$ export MONGODB_IP=$(host $MONGODB_HOST | grep " has address " | cut -d" " -f4)

Control TCP egress traffic without a gateway

In case you do not need to direct the traffic through an egress gateway, for example if you do not have a requirement that all the traffic that exists your mesh must exit through the gateway, follow the instructions in this section. Alternatively, if you do want to direct your traffic through an egress gateway, proceed to Direct TCP egress traffic through an egress gateway.

Define a TCP mesh-external service entry:
```
$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: mongo
spec:
  hosts:
  - my-mongo.tcp.svc
  addresses:
  - $MONGODB_IP/32
  ports:
  - number: $MONGODB_PORT
    name: tcp
    protocol: TCP
  location: MESH_EXTERNAL
  resolution: STATIC
  endpoints:
  - address: $MONGODB_IP
EOF
```
Note that the protocol TCP is specified instead of MONGO due to the fact that the traffic can be encrypted in case the MongoDB protocol runs on top of TLS. If the traffic is encrypted, the encrypted MongoDB protocol cannot be parsed by the Istio proxy.
If you know that the plain MongoDB protocol is used, without encryption, you can specify the protocol as MONGO and let the Istio proxy produce MongoDB related statistics. Also note that when the protocol TCP is specified, the configuration is not specific for MongoDB, but is the same for any other database with the protocol on top of TCP.
Note that the host of your MongoDB is not used in TCP routing, so you can use any host, for example my-mongo.tcp.svc. Notice the STATIC resolution and the endpoint with the IP of your MongoDB service. Once you define such an endpoint, you can access MongoDB services that do not have a domain name.
Refresh the web page of the application. Now the application should display the ratings without error:
Book Ratings Displayed Correctly
Note that you see a one-star rating for both displayed reviews, as expected. You set the ratings to be one star to provide yourself with a visual clue that your external database is indeed being used.
If you want to direct the traffic through an egress gateway, proceed to the next section. Otherwise, perform cleanup.

Direct TCP Egress traffic through an egress gateway

In this section you handle the case when you need to direct the traffic through an egress gateway. The sidecar proxy routes TCP connections from the MongoDB client to the egress gateway, by matching the IP of the MongoDB host (a CIDR block of length 32). The egress gateway forwards the traffic to the MongoDB host, by its hostname.

Deploy Istio egress gateway.
If you did not perform the steps in the previous section, perform them now.
You may want to enable mutual TLS Authentication between the sidecar proxies of your MongoDB clients and the egress gateway to let the egress gateway monitor the identity of the source pods and to enable Mixer policy enforcement based on that identity. By enabling mutual TLS you also encrypt the traffic. If you do not want to enable mutual TLS, proceed to the Mutual TLS between the sidecar proxies and the egress gateway section. Otherwise, proceed to the following section.

Configure TCP traffic from sidecars to the egress gateway

Define the EGRESS_GATEWAY_MONGODB_PORT environment variable to hold some port for directing traffic through the egress gateway, e.g. 7777. You must select a port that is not used for any other service in the mesh.
```
$ export EGRESS_GATEWAY_MONGODB_PORT=7777
```

Add the selected port to the istio-egressgateway service. You should use the same values you used for installing Istio, in particular you have to specify all the ports of the istio-egressgateway service that you previously configured.

$ helm template install/kubernetes/helm/istio/ --name istio-egressgateway --namespace istio-system -x charts/gateways/templates/deployment.yaml -x charts/gateways/templates/service.yaml --set gateways.istio-ingressgateway.enabled=false --set gateways.istio-egressgateway.enabled=true --set gateways.istio-egressgateway.ports[0].port=80 --set gateways.istio-egressgateway.ports[0].name=http --set gateways.istio-egressgateway.ports[1].port=443 --set gateways.istio-egressgateway.ports[1].name=https --set gateways.istio-egressgateway.ports[2].port=$EGRESS_GATEWAY_MONGODB_PORT --set gateways.istio-egressgateway.ports[2].name=mongo | kubectl apply -f -

Check that the istio-egressgateway service indeed has the selected port:

$ kubectl get svc istio-egressgateway -n istio-system
NAME                  TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                   AGE
istio-egressgateway   ClusterIP   172.21.202.204   <none>        80/TCP,443/TCP,7777/TCP   34d

Disable mutual TLS authentication for the istio-egressgateway service:

$ kubectl apply -f - <<EOF
apiVersion: authentication.istio.io/v1alpha1
kind: Policy
metadata:
  name: istio-egressgateway
  namespace: istio-system
spec:
  targets:
  - name: istio-egressgateway
EOF

Create an egress Gateway for your MongoDB service, and destination rules and a virtual service to direct the traffic through the egress gateway and from the egress gateway to the external service.

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: istio-egressgateway
spec:
  selector:
    istio: egressgateway
  servers:
  - port:
      number: $EGRESS_GATEWAY_MONGODB_PORT
      name: tcp
      protocol: TCP
    hosts:
    - my-mongo.tcp.svc
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: egressgateway-for-mongo
spec:
  host: istio-egressgateway.istio-system.svc.cluster.local
  subsets:
  - name: mongo
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: mongo
spec:
  host: my-mongo.tcp.svc
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: direct-mongo-through-egress-gateway
spec:
  hosts:
  - my-mongo.tcp.svc
  gateways:
  - mesh
  - istio-egressgateway
  tcp:
  - match:
    - gateways:
      - mesh
      destinationSubnets:
      - $MONGODB_IP/32
      port: $MONGODB_PORT
    route:
    - destination:
        host: istio-egressgateway.istio-system.svc.cluster.local
        subset: mongo
        port:
          number: $EGRESS_GATEWAY_MONGODB_PORT
  - match:
    - gateways:
      - istio-egressgateway
      port: $EGRESS_GATEWAY_MONGODB_PORT
    route:
    - destination:
        host: my-mongo.tcp.svc
        port:
          number: $MONGODB_PORT
      weight: 100
EOF

Verify that egress traffic is directed through the egress gateway.

Mutual TLS between the sidecar proxies and the egress gateway

Delete the previous configuration:

$ kubectl delete gateway istio-egressgateway --ignore-not-found=true
$ kubectl delete virtualservice direct-mongo-through-egress-gateway --ignore-not-found=true
$ kubectl delete destinationrule egressgateway-for-mongo mongo --ignore-not-found=true
$ kubectl delete policy istio-egressgateway -n istio-system --ignore-not-found=true

Enforce mutual TLS authentication for the istio-egressgateway service:

$ kubectl apply -f - <<EOF
apiVersion: authentication.istio.io/v1alpha1
kind: Policy
metadata:
  name: istio-egressgateway
  namespace: istio-system
spec:
  targets:
  - name: istio-egressgateway
  peers:
  - mtls: {}
EOF

Create an egress Gateway for your MongoDB service, and destination rules and a virtual service to direct the traffic through the egress gateway and from the egress gateway to the external service.

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: istio-egressgateway
spec:
  selector:
    istio: egressgateway
  servers:
  - port:
      number: 443
      name: tls
      protocol: TLS
    hosts:
    - my-mongo.tcp.svc
    tls:
      mode: MUTUAL
      serverCertificate: /etc/certs/cert-chain.pem
      privateKey: /etc/certs/key.pem
      caCertificates: /etc/certs/root-cert.pem
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: egressgateway-for-mongo
spec:
  host: istio-egressgateway.istio-system.svc.cluster.local
  subsets:
  - name: mongo
    trafficPolicy:
      loadBalancer:
        simple: ROUND_ROBIN
      portLevelSettings:
      - port:
          number: 443
        tls:
          mode: ISTIO_MUTUAL
          sni: my-mongo.tcp.svc
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: mongo
spec:
  host: my-mongo.tcp.svc
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: direct-mongo-through-egress-gateway
spec:
  hosts:
  - my-mongo.tcp.svc
  gateways:
  - mesh
  - istio-egressgateway
  tcp:
  - match:
    - gateways:
      - mesh
      destinationSubnets:
      - $MONGODB_IP/32
      port: $MONGODB_PORT
    route:
    - destination:
        host: istio-egressgateway.istio-system.svc.cluster.local
        subset: mongo
        port:
          number: 443
  - match:
    - gateways:
      - istio-egressgateway
      port: 443
    route:
    - destination:
        host: my-mongo.tcp.svc
        port:
          number: $MONGODB_PORT
      weight: 100
EOF

Proceed to the next section.

Verify that egress traffic is directed through the egress gateway

Refresh the web page of the application again and verify that the ratings are still displayed correctly.
Enable Envoy’s access logging

Check the log of the egress gateway’s Envoy and see a line that corresponds to your requests to the MongoDB service. If Istio is deployed in the istio-system namespace, the command to print the log is:

$ kubectl logs -l istio=egressgateway -n istio-system
[2019-04-14T06:12:07.636Z] "- - -" 0 - "-" 1591 4393 94 - "-" "-" "-" "-" "<Your MongoDB IP>:<your MongoDB port>" outbound|<your MongoDB port>||my-mongo.tcp.svc 172.30.146.119:59924 172.30.146.119:443 172.30.230.1:59206 -

Cleanup of TCP egress traffic control

$ kubectl delete serviceentry mongo
$ kubectl delete gateway istio-egressgateway --ignore-not-found=true
$ kubectl delete virtualservice direct-mongo-through-egress-gateway --ignore-not-found=true
$ kubectl delete destinationrule egressgateway-for-mongo mongo --ignore-not-found=true
$ kubectl delete policy istio-egressgateway -n istio-system --ignore-not-found=true

Egress control for TLS

In the real life, most of the communication to the external services must be encrypted and the MongoDB protocol runs on top of TLS. Also, the TLS clients usually send Server Name Indication, SNI, as part of their handshake. If your MongoDB server runs TLS and your MongoDB client sends SNI as part of the handshake, you can control your MongoDB egress traffic as any other TLS-with-SNI traffic. With TLS and SNI, you do not need to specify the IP addresses of your MongoDB servers. You specify their host names instead, which is more convenient since you do not have to rely on the stability of the IP addresses. You can also specify wildcards as a prefix of the host names, for example allowing access to any server from the *.com domain.

To check if your MongoDB server supports TLS, run:

$ openssl s_client -connect $MONGODB_HOST:$MONGODB_PORT -servername $MONGODB_HOST

If the command above prints a certificate returned by the server, the server supports TLS. If not, you have to control your MongoDB egress traffic on the TCP level, as described in the previous sections.

Control TLS egress traffic without a gateway

In case you do not need an egress gateway, follow the instructions in this section. If you want to direct your traffic through an egress gateway, proceed to Direct TCP Egress traffic through an egress gateway.

Create a ServiceEntry for the MongoDB service:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: mongo
spec:
  hosts:
  - $MONGODB_HOST
  ports:
  - number: $MONGODB_PORT
    name: tls
    protocol: TLS
  resolution: DNS
EOF

Refresh the web page of the application. The application should display the ratings without error.

Cleanup of the egress configuration for TLS

$ kubectl delete serviceentry mongo

Direct TLS Egress traffic through an egress gateway

In this section you handle the case when you need to direct the traffic through an egress gateway. The sidecar proxy routes TLS connections from the MongoDB client to the egress gateway, by matching the SNI of the MongoDB host. The egress gateway forwards the traffic to the MongoDB host. Note that the sidecar proxy rewrites the destination port to be 443. The egress gateway accepts the MongoDB traffic on the port 443, matches the MongoDB host by SNI, and rewrites the port again to be the port of the MongoDB server.

Deploy Istio egress gateway.

Create a ServiceEntry for the MongoDB service:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: mongo
spec:
  hosts:
  - $MONGODB_HOST
  ports:
  - number: $MONGODB_PORT
    name: tls
    protocol: TLS
  - number: 443
    name: tls-port-for-egress-gateway
    protocol: TLS
  resolution: DNS
  location: MESH_EXTERNAL
EOF

Refresh the web page of the application and verify that the ratings are displayed correctly.

Create an egress Gateway for your MongoDB service, and destination rules and virtual services to direct the traffic through the egress gateway and from the egress gateway to the external service.

If you want to enable mutual TLS Authentication between the sidecar proxies of your application pods and the egress gateway, use the following command. (You may want to enable mutual TLS to let the egress gateway monitor the identity of the source pods and to enable Mixer policy enforcement based on that identity.)

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: istio-egressgateway
spec:
  selector:
istio: egressgateway
  servers:
  - port:
  number: 443
  name: tls
  protocol: TLS
hosts:
- $MONGODB_HOST
tls:
  mode: MUTUAL
  serverCertificate: /etc/certs/cert-chain.pem
  privateKey: /etc/certs/key.pem
  caCertificates: /etc/certs/root-cert.pem
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: egressgateway-for-mongo
spec:
  host: istio-egressgateway.istio-system.svc.cluster.local
  subsets:
  - name: mongo
trafficPolicy:
  loadBalancer:
    simple: ROUND_ROBIN
  portLevelSettings:
  - port:
      number: 443
    tls:
      mode: ISTIO_MUTUAL
      sni: $MONGODB_HOST
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: direct-mongo-through-egress-gateway
spec:
  hosts:
  - $MONGODB_HOST
  gateways:
  - mesh
  - istio-egressgateway
  tls:
  - match:
- gateways:
  - mesh
  port: $MONGODB_PORT
  sni_hosts:
  - $MONGODB_HOST
route:
- destination:
    host: istio-egressgateway.istio-system.svc.cluster.local
    subset: mongo
    port:
      number: 443
  tcp:
  - match:
- gateways:
  - istio-egressgateway
  port: 443
route:
- destination:
    host: $MONGODB_HOST
    port:
      number: $MONGODB_PORT
  weight: 100
EOF

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: istio-egressgateway
spec:
  selector:
istio: egressgateway
  servers:
  - port:
  number: 443
  name: tls
  protocol: TLS
hosts:
- $MONGODB_HOST
tls:
  mode: PASSTHROUGH
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: egressgateway-for-mongo
spec:
  host: istio-egressgateway.istio-system.svc.cluster.local
  subsets:
  - name: mongo
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: direct-mongo-through-egress-gateway
spec:
  hosts:
  - $MONGODB_HOST
  gateways:
  - mesh
  - istio-egressgateway
  tls:
  - match:
- gateways:
  - mesh
  port: $MONGODB_PORT
  sni_hosts:
  - $MONGODB_HOST
route:
- destination:
    host: istio-egressgateway.istio-system.svc.cluster.local
    subset: mongo
    port:
      number: 443
  - match:
- gateways:
  - istio-egressgateway
  port: 443
  sni_hosts:
  - $MONGODB_HOST
route:
- destination:
    host: $MONGODB_HOST
    port:
      number: $MONGODB_PORT
  weight: 100
EOF

Verify that the traffic is directed though the egress gateway

Cleanup directing TLS egress traffic through an egress gateway

$ kubectl delete serviceentry mongo
$ kubectl delete gateway istio-egressgateway
$ kubectl delete virtualservice direct-mongo-through-egress-gateway
$ kubectl delete destinationrule egressgateway-for-mongo

Enable MongoDB TLS egress traffic to arbitrary wildcarded domains

Sometimes you want to configure egress traffic to multiple hostnames from the same domain, for example traffic to all MongoDB services from *.<your company domain>.com. You do not want to create multiple configuration items, one for each and every MongoDB service in your company. To configure access to all the external services from the same domain by a single configuration, you use wildcarded hosts.

In this section you configure egress traffic for a wildcarded domain. I used a MongoDB instance at composedb.com domain, so configuring egress traffic for *.com worked for me (I could have used *.composedb.com as well). You can pick a wildcarded domain according to your MongoDB host.

To configure egress gateway traffic for a wildcarded domain, you will first need to deploy a custom egress gateway with an additional SNI proxy. This is needed due to current limitations of Envoy, the proxy used by the standard Istio egress gateway.

Prepare a new egress gateway with an SNI proxy

In this subsection you deploy an egress gateway with an SNI proxy, in addition to the standard Istio Envoy proxy. You can use any SNI proxy that is capable of routing traffic according to arbitrary, not-preconfigured SNI values; we used Nginx to achieve this functionality.

Create a configuration file for the Nginx SNI proxy. You may want to edit the file to specify additional Nginx settings, if required.

$ cat <<EOF > ./sni-proxy.conf
user www-data;

events {
}

stream {
  log_format log_stream '\$remote_addr [\$time_local] \$protocol [\$ssl_preread_server_name]'
  '\$status \$bytes_sent \$bytes_received \$session_time';

  access_log /var/log/nginx/access.log log_stream;
  error_log  /var/log/nginx/error.log;

  # tcp forward proxy by SNI
  server {
    resolver 8.8.8.8 ipv6=off;
    listen       127.0.0.1:$MONGODB_PORT;
    proxy_pass   \$ssl_preread_server_name:$MONGODB_PORT;
    ssl_preread  on;
  }
}
EOF

Create a Kubernetes ConfigMap to hold the configuration of the Nginx SNI proxy:

$ kubectl create configmap egress-sni-proxy-configmap -n istio-system --from-file=nginx.conf=./sni-proxy.conf

The following command will generate istio-egressgateway-with-sni-proxy.yaml to edit and deploy.

$ cat <<EOF | helm template install/kubernetes/helm/istio/ --name istio-egressgateway-with-sni-proxy --namespace istio-system -x charts/gateways/templates/deployment.yaml -x charts/gateways/templates/service.yaml -x charts/gateways/templates/serviceaccount.yaml -x charts/gateways/templates/autoscale.yaml -x charts/gateways/templates/role.yaml -x charts/gateways/templates/rolebindings.yaml --set global.mtls.enabled=true --set global.istioNamespace=istio-system -f - > ./istio-egressgateway-with-sni-proxy.yaml
gateways:
  enabled: true
  istio-ingressgateway:
    enabled: false
  istio-egressgateway:
    enabled: false
  istio-egressgateway-with-sni-proxy:
    enabled: true
    labels:
      app: istio-egressgateway-with-sni-proxy
      istio: egressgateway-with-sni-proxy
    replicaCount: 1
    autoscaleMin: 1
    autoscaleMax: 5
    cpu:
      targetAverageUtilization: 80
    serviceAnnotations: {}
    type: ClusterIP
    ports:
      - port: 443
        name: https
    secretVolumes:
      - name: egressgateway-certs
        secretName: istio-egressgateway-certs
        mountPath: /etc/istio/egressgateway-certs
      - name: egressgateway-ca-certs
        secretName: istio-egressgateway-ca-certs
        mountPath: /etc/istio/egressgateway-ca-certs
    configVolumes:
      - name: sni-proxy-config
        configMapName: egress-sni-proxy-configmap
    additionalContainers:
    - name: sni-proxy
      image: nginx
      volumeMounts:
      - name: sni-proxy-config
        mountPath: /etc/nginx
        readOnly: true
EOF

Deploy the new egress gateway:

$ kubectl apply -f ./istio-egressgateway-with-sni-proxy.yaml
serviceaccount "istio-egressgateway-with-sni-proxy-service-account" created
role "istio-egressgateway-with-sni-proxy-istio-system" created
rolebinding "istio-egressgateway-with-sni-proxy-istio-system" created
service "istio-egressgateway-with-sni-proxy" created
deployment "istio-egressgateway-with-sni-proxy" created
horizontalpodautoscaler "istio-egressgateway-with-sni-proxy" created

Verify that the new egress gateway is running. Note that the pod has two containers (one is the Envoy proxy and the second one is the SNI proxy).

$ kubectl get pod -l istio=egressgateway-with-sni-proxy -n istio-system
NAME                                                  READY     STATUS    RESTARTS   AGE
istio-egressgateway-with-sni-proxy-79f6744569-pf9t2   2/2       Running   0          17s

Create a service entry with a static address equal to 127.0.0.1 (localhost), and disable mutual TLS on the traffic directed to the new service entry:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: sni-proxy
spec:
  hosts:
  - sni-proxy.local
  location: MESH_EXTERNAL
  ports:
  - number: $MONGODB_PORT
    name: tcp
    protocol: TCP
  resolution: STATIC
  endpoints:
  - address: 127.0.0.1
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: disable-mtls-for-sni-proxy
spec:
  host: sni-proxy.local
  trafficPolicy:
    tls:
      mode: DISABLE
EOF

Configure access to `*.com` using the new egress gateway

Define a ServiceEntry for *.com:

$ cat <<EOF | kubectl create -f -
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
  name: mongo
spec:
  hosts:
  - "*.com"
  ports:
  - number: 443
    name: tls
    protocol: TLS
  - number: $MONGODB_PORT
    name: tls-mongodb
    protocol: TLS
  location: MESH_EXTERNAL
EOF

Create an egress Gateway for *.com, port 443, protocol TLS, a destination rule to set the SNI for the gateway, and Envoy filters to prevent tampering with SNI by a malicious application (the filters verify that the SNI issued by the application is the SNI reported to Mixer).

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: istio-egressgateway-with-sni-proxy
spec:
  selector:
    istio: egressgateway-with-sni-proxy
  servers:
  - port:
      number: 443
      name: tls
      protocol: TLS
    hosts:
    - "*.com"
    tls:
      mode: MUTUAL
      serverCertificate: /etc/certs/cert-chain.pem
      privateKey: /etc/certs/key.pem
      caCertificates: /etc/certs/root-cert.pem
---
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
  name: mtls-for-egress-gateway
spec:
  host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
  subsets:
    - name: mongo
      trafficPolicy:
        loadBalancer:
          simple: ROUND_ROBIN
        portLevelSettings:
        - port:
            number: 443
          tls:
            mode: ISTIO_MUTUAL
---
# The following filter is used to forward the original SNI (sent by the application) as the SNI of the mutual TLS
# connection.
# The forwarded SNI will be reported to Mixer so that policies will be enforced based on the original SNI value.
apiVersion: networking.istio.io/v1alpha3
kind: EnvoyFilter
metadata:
  name: forward-downstream-sni
spec:
  filters:
  - listenerMatch:
      portNumber: $MONGODB_PORT
      listenerType: SIDECAR_OUTBOUND
    filterName: forward_downstream_sni
    filterType: NETWORK
    filterConfig: {}
---
# The following filter verifies that the SNI of the mutual TLS connection (the SNI reported to Mixer) is
# identical to the original SNI issued by the application (the SNI used for routing by the SNI proxy).
# The filter prevents Mixer from being deceived by a malicious application: routing to one SNI while
# reporting some other value of SNI. If the original SNI does not match the SNI of the mutual TLS connection, the
# filter will block the connection to the external service.
apiVersion: networking.istio.io/v1alpha3
kind: EnvoyFilter
metadata:
  name: egress-gateway-sni-verifier
spec:
  workloadLabels:
    app: istio-egressgateway-with-sni-proxy
  filters:
  - listenerMatch:
      portNumber: 443
      listenerType: GATEWAY
    filterName: sni_verifier
    filterType: NETWORK
    filterConfig: {}
EOF

Route the traffic destined for *.com to the egress gateway and from the egress gateway to the SNI proxy.

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: direct-mongo-through-egress-gateway
spec:
  hosts:
  - "*.com"
  gateways:
  - mesh
  - istio-egressgateway-with-sni-proxy
  tls:
  - match:
    - gateways:
      - mesh
      port: $MONGODB_PORT
      sni_hosts:
      - "*.com"
    route:
    - destination:
        host: istio-egressgateway-with-sni-proxy.istio-system.svc.cluster.local
        subset: mongo
        port:
          number: 443
      weight: 100
  tcp:
  - match:
    - gateways:
      - istio-egressgateway-with-sni-proxy
      port: 443
    route:
    - destination:
        host: sni-proxy.local
        port:
          number: $MONGODB_PORT
      weight: 100
EOF

Refresh the web page of the application again and verify that the ratings are still displayed correctly.
Enable Envoy’s access logging

Check the log of the egress gateway’s Envoy proxy. If Istio is deployed in the istio-system namespace, the command to print the log is:

$ kubectl logs -l istio=egressgateway-with-sni-proxy -c istio-proxy -n istio-system

You should see lines similar to the following:

[2019-01-02T17:22:04.602Z] "- - -" 0 - 768 1863 88 - "-" "-" "-" "-" "127.0.0.1:28543" outbound|28543||sni-proxy.local 127.0.0.1:49976 172.30.146.115:443 172.30.146.118:58510 <your MongoDB host>
[2019-01-02T17:22:04.713Z] "- - -" 0 - 1534 2590 85 - "-" "-" "-" "-" "127.0.0.1:28543" outbound|28543||sni-proxy.local 127.0.0.1:49988 172.30.146.115:443 172.30.146.118:58522 <your MongoDB host>

Check the logs of the SNI proxy. If Istio is deployed in the istio-system namespace, the command to print the log is:

$ kubectl logs -l istio=egressgateway-with-sni-proxy -n istio-system -c sni-proxy
127.0.0.1 [23/Aug/2018:03:28:18 +0000] TCP [<your MongoDB host>]200 1863 482 0.089
127.0.0.1 [23/Aug/2018:03:28:18 +0000] TCP [<your MongoDB host>]200 2590 1248 0.095

Understanding what happened

In this section you configured egress traffic to your MongoDB host using a wildcarded domain. While for a single MongoDB host there is no gain in using wildcarded domains (an exact hostname can be specified), it could be beneficial for cases when the applications in the cluster access multiple MongoDB hosts that match some wildcarded domain. For example, if the applications access mongodb1.composedb.com, mongodb2.composedb.com and mongodb3.composedb.com, the egress traffic can be configured by a single configuration for the wildcarded domain *.composedb.com.

I will leave it as an exercise for the reader to verify that no additional Istio configuration is required when you configure an app to use another instance of MongoDB with a hostname that matches the wildcarded domain used in this section.

Cleanup of configuration for MongoDB TLS egress traffic to arbitrary wildcarded domains

Delete the configuration items for *.com:

$ kubectl delete serviceentry mongo
$ kubectl delete gateway istio-egressgateway-with-sni-proxy
$ kubectl delete virtualservice direct-mongo-through-egress-gateway
$ kubectl delete destinationrule mtls-for-egress-gateway
$ kubectl delete envoyfilter forward-downstream-sni egress-gateway-sni-verifier

Delete the configuration items for the egressgateway-with-sni-proxy deployment:

$ kubectl delete serviceentry sni-proxy
$ kubectl delete destinationrule disable-mtls-for-sni-proxy
$ kubectl delete -f ./istio-egressgateway-with-sni-proxy.yaml
$ kubectl delete configmap egress-sni-proxy-configmap -n istio-system

Remove the configuration files you created:

$ rm ./istio-egressgateway-with-sni-proxy.yaml
$ rm ./nginx-sni-proxy.conf

Cleanup

Drop the bookinfo user:

$ cat <<EOF | mongo --ssl --sslAllowInvalidCertificates $MONGODB_HOST:$MONGODB_PORT -u admin -p $MONGO_ADMIN_PASSWORD --authenticationDatabase admin
use test
db.dropUser("bookinfo");
EOF

Drop the ratings collection:

$ cat <<EOF | mongo --ssl --sslAllowInvalidCertificates $MONGODB_HOST:$MONGODB_PORT -u admin -p $MONGO_ADMIN_PASSWORD --authenticationDatabase admin
use test
db.ratings.drop();
EOF

Unset the environment variables you used:

$ unset MONGO_ADMIN_PASSWORD BOOKINFO_PASSWORD MONGODB_HOST MONGODB_PORT MONGODB_IP

Remove the virtual services:

$ kubectl delete -f @samples/bookinfo/networking/virtual-service-ratings-db.yaml@
Deleted config: virtual-service/default/reviews
Deleted config: virtual-service/default/ratings

Undeploy ratings v2-mongodb:

$ kubectl delete -f @samples/bookinfo/platform/kube/bookinfo-ratings-v2.yaml@
deployment "ratings-v2" deleted

Conclusion

In this blog post I demonstrated various options for MongoDB egress traffic control. You can control the MongoDB egress traffic on a TCP or TLS level where applicable. In both TCP and TLS cases, you can direct the traffic from the sidecar proxies directly to the external MongoDB host, or direct the traffic through an egress gateway, according to your organization’s security requirements. In the latter case, you can also decide to apply or disable mutual TLS authentication between the sidecar proxies and the egress gateway. If you want to control MongoDB egress traffic on the TLS level by specifying wildcarded domains like *.com and you need to direct the traffic through the egress gateway, you must deploy a custom egress gateway with an SNI proxy.

Note that the configuration and considerations described in this blog post for MongoDB are rather the same for other non-HTTP protocols on top of TCP/TLS.

Veja também

Egress Gateway Performance Investigation

Verifies the performance impact of adding an egress gateway.

Consuming External TCP Services

Describes a simple scenario based on Istio's Bookinfo example.

Secure Control of Egress Traffic in Istio, part 3

Comparison of alternative solutions to control egress traffic including performance considerations.

Secure Control of Egress Traffic in Istio, part 2

Use Istio Egress Traffic Control to prevent attacks involving egress traffic.

Secure Control of Egress Traffic in Istio, part 1

Attacks involving egress traffic and requirements for egress traffic control.

Monitoring and Access Policies for HTTP Egress Traffic

Describes how to configure Istio for monitoring and access policies of HTTP egress traffic.

Consuming External MongoDB Services

Bookinfo with external ratings database

Setting up the ratings database

Initial setting of Bookinfo application

Use the external database in Bookinfo application

Access the webpage

Egress control for TCP

Control TCP egress traffic without a gateway

Direct TCP Egress traffic through an egress gateway

Configure TCP traffic from sidecars to the egress gateway

Mutual TLS between the sidecar proxies and the egress gateway

Verify that egress traffic is directed through the egress gateway

Cleanup of TCP egress traffic control

Egress control for TLS

Control TLS egress traffic without a gateway

Cleanup of the egress configuration for TLS

Direct TLS Egress traffic through an egress gateway

Cleanup directing TLS egress traffic through an egress gateway

Enable MongoDB TLS egress traffic to arbitrary wildcarded domains

Prepare a new egress gateway with an SNI proxy

Configure access to *.com using the new egress gateway

Understanding what happened

Cleanup of configuration for MongoDB TLS egress traffic to arbitrary wildcarded domains

Cleanup

Conclusion

Configure access to `*.com` using the new egress gateway