istioctl

Istio configuration command line utility for service operators to debug and diagnose their Istio mesh.

istioctl analyze

Analyze Istio configuration and print validation messages

istioctl analyze <file>... [flags]

Examples

# Analyze the current live cluster
istioctl analyze

# Analyze the current live cluster, simulating the effect of applying additional yaml files
istioctl analyze a.yaml b.yaml my-app-config/

# Analyze the current live cluster, simulating the effect of applying a directory of config recursively
istioctl analyze --recursive my-istio-config/

# Analyze yaml files without connecting to a live cluster
istioctl analyze --use-kube=false a.yaml b.yaml my-app-config/

# Analyze the current live cluster and suppress PodMissingProxy for pod mypod in namespace 'testing'.
istioctl analyze -S "IST0103=Pod mypod.testing"

# Analyze the current live cluster and suppress PodMissingProxy for all pods in namespace 'testing',
# and suppress MisplacedAnnotation on deployment foobar in namespace default.
istioctl analyze -S "IST0103=Pod *.testing" -S "IST0107=Deployment foobar.default"

# List available analyzers
istioctl analyze -L

istioctl authn

A group of commands used to interact with Istio authentication policies. tls-check

Examples

# Check whether TLS setting are matching between authentication policy and destination rules:
istioctl authn tls-check

istioctl authn tls-check

Check what authentication policies and destination rules pilot uses to config a proxy instance, and check if TLS settings are compatible between them.

istioctl authn tls-check <pod-name[.namespace]> [<service>] [flags]

Examples

# Check settings for pod "foo-656bd7df7c-5zp4s" in namespace default:
istioctl authn tls-check foo-656bd7df7c-5zp4s.default

# Check settings for pod "foo-656bd7df7c-5zp4s" in namespace default, filtered on destination
service "bar" :
istioctl authn tls-check foo-656bd7df7c-5zp4s.default bar

istioctl authz

(authz is experimental. Use `istioctl experimental authz`)

istioctl authz [flags]

istioctl convert-ingress

Converts Ingresses into VirtualService configuration on a best effort basis. The output should be considered a starting point for your Istio configuration and probably require some minor modification. Warnings will be generated where configs cannot be converted perfectly. The input must be a Kubernetes Ingress. The conversion of v1alpha1 Istio rules has been removed from istioctl.

istioctl convert-ingress [flags]

Examples

istioctl convert-ingress -f samples/bookinfo/platform/kube/bookinfo-ingress.yaml

istioctl dashboard

Access to Istio web UIs

istioctl dashboard [flags]

istioctl dash [flags]
istioctl d [flags]

istioctl dashboard controlz

Open the ControlZ web UI for a pod in the Istio control plane

istioctl dashboard controlz <pod-name[.namespace]> [flags]

Examples

istioctl dashboard controlz pilot-123-456.istio-system

istioctl dashboard envoy

Open the Envoy admin dashboard for a sidecar

istioctl dashboard envoy <pod-name[.namespace]> [flags]

Examples

istioctl dashboard envoy productpage-123-456.default

istioctl dashboard grafana

Open Istio's Grafana dashboard

istioctl dashboard grafana [flags]

Examples

istioctl dashboard grafana

istioctl dashboard jaeger

Open Istio's Jaeger dashboard

istioctl dashboard jaeger [flags]

Examples

istioctl dashboard jaeger

istioctl dashboard kiali

Open Istio's Kiali dashboard

istioctl dashboard kiali [flags]

Examples

istioctl dashboard kiali

istioctl dashboard prometheus

Open Istio's Prometheus dashboard

istioctl dashboard prometheus [flags]

Examples

istioctl dashboard prometheus

istioctl dashboard zipkin

Open Istio's Zipkin dashboard

istioctl dashboard zipkin [flags]

Examples

istioctl dashboard zipkin

istioctl deregister

De-registers a service instance

istioctl deregister <svcname> <ip> [flags]

Examples

# de-register an endpoint 172.17.0.2 from service my-svc:
istioctl deregister my-svc 172.17.0.2

istioctl experimental

Experimental commands that may be modified or deprecated

istioctl experimental add-to-mesh

Add workloads into Istio service mesh

istioctl experimental add-to-mesh [flags]

istioctl experimental add [flags]

istioctl experimental add-to-mesh deployment

istioctl experimental add-to-mesh deployment restarts pods with the Istio sidecar. Use 'add-to-mesh' to test deployments for compatibility with Istio. If your deployment does not function after using 'add-to-mesh' you must re-deploy it and troubleshoot it for Istio compatibility. See https://istio.io/docs/setup/kubernetes/additional-setup/requirements/ THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh deployment [flags]

Examples

istioctl experimental add-to-mesh deployment productpage-v1

istioctl experimental add-to-mesh external-service

istioctl experimental add-to-mesh external-service create a ServiceEntry and\ a Service without selector for the specified external service in Istio service mesh. The typical usage scenario is Mesh Expansion on VMs. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh external-service <svcname> <ip>... [name1:]port1 [name2:]port2 ... [flags]

Examples

istioctl experimental add-to-mesh external-service vmhttp 172.12.23.125,172.12.23.126\
http:9080 tcp:8888 -l app=test,version=v1 -a env=stage -s stageAdmin

istioctl experimental add-to-mesh service

istioctl experimental add-to-mesh service restarts pods with the Istio sidecar. Use 'add-to-mesh' to test deployments for compatibility with Istio. If your service does not function after using 'add-to-mesh' you must re-deploy it and troubleshoot it for Istio compatibility. See https://istio.io/docs/setup/kubernetes/additional-setup/requirements/ THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental add-to-mesh service [flags]

Examples

istioctl experimental add-to-mesh service productpage

istioctl experimental analyze

Analyze Istio configuration and print validation messages (analyze has graduated. Use `istioctl analyze`)

istioctl experimental analyze <file>... [flags]

Examples

# Analyze the current live cluster
istioctl analyze

# Analyze the current live cluster, simulating the effect of applying additional yaml files
istioctl analyze a.yaml b.yaml my-app-config/

# Analyze the current live cluster, simulating the effect of applying a directory of config recursively
istioctl analyze --recursive my-istio-config/

# Analyze yaml files without connecting to a live cluster
istioctl analyze --use-kube=false a.yaml b.yaml my-app-config/

# Analyze the current live cluster and suppress PodMissingProxy for pod mypod in namespace 'testing'.
istioctl analyze -S "IST0103=Pod mypod.testing"

# Analyze the current live cluster and suppress PodMissingProxy for all pods in namespace 'testing',
# and suppress MisplacedAnnotation on deployment foobar in namespace default.
istioctl analyze -S "IST0103=Pod *.testing" -S "IST0107=Deployment foobar.default"

# List available analyzers
istioctl analyze -L

istioctl experimental authz

Commands to inspect and interact with the authorization policies check - check Envoy config dump for authorization configuration convert - convert v1alpha1 RBAC policies to v1beta1 authorization policies

Examples

  # Check Envoy authorization configuration for pod httpbin-88ddbcfdd-nt5jb:
  istioctl x authz check httpbin-88ddbcfdd-nt5jb

  # Convert the v1alpha1 RBAC policies in the current cluster:
  istioctl x authz convert > authorization-policies.yaml

  # Convert the v1alpha1 RBAC policies in the file with the given services and root namespace:
  istioctl x authz convert -f rbac-policies.yaml -s my-service.yaml -r istio-system > authorization-policies.yaml

istioctl experimental authz check

Check reads the Envoy config dump and checks the filter configuration related to authorization. For example, it shows whether or not the Envoy is configured with authorization and the rules used in the authorization.

The Envoy config dump could be provided either by pod name or from a config dump file (the whole output of http://localhost:15000/config_dump of an Envoy instance).

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental authz check <pod-name>[.<pod-namespace>] [flags]

Examples

  # Check Envoy authorization configuration for pod httpbin-88ddbcfdd-nt5jb:
  istioctl x authz check httpbin-88ddbcfdd-nt5jb

  # Check Envoy authorization configuration from a config dump file:
  istioctl x authz check -f httpbin_config_dump.json

istioctl experimental authz convert

Convert Istio v1alpha1 RBAC policy to v1beta1 authorization policy. By default, The command talks to Istio Pilot and Kubernetes API server to get all the information needed for the conversion, including the v1alpha1 RBAC policies in the current cluster, the value of the root namespace and the Kubernetes services that provide the mapping from the service name to workload selector.

The tool can also be used in an offline mode when specified with flag -f. In this mode, the tool doesn't access the network and all needed information is provided through the command line.

Note: The converter tool makes a best effort attempt to keep the syntax unchanged during the conversion. However, in some cases, strict mapping with equivalent syntax is not possible (e.g., constraints no longer supported in the new workload oriented model).

PLEASE ALWAYS REVIEW THE CONVERTED POLICIES BEFORE APPLYING.

istioctl experimental authz convert [flags]

Examples

  # Convert the v1alpha1 RBAC policy in the current cluster:
  istioctl x authz convert > authorization-policies.yaml

  # Convert the v1alpha1 RBAC policy in the given file: 
  istioctl x authz convert -f v1alpha1-policy-1.yaml,v1alpha1-policy-2.yaml
  -s my-services.yaml -r my-root-namespace > authorization-policies.yaml

istioctl experimental convert-ingress

(convert-ingress has graduated. Use `istioctl convert-ingress`)

istioctl experimental convert-ingress [flags]

istioctl experimental create-remote-secret

Create a secret with credentials to allow Istio to access remote Kubernetes apiservers

istioctl experimental create-remote-secret [flags]

Examples

# Create a secret to access cluster c0's apiserver and install it in cluster c1.
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 \
    | kubectl -n istio-system --Kubeconfig=c1.yaml apply -f -

# Delete a secret that was previously installed in c1
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 \
    | kubectl -n istio-system --Kubeconfig=c1.yaml delete -f -

# Create a secret access a remote cluster with an auth plugin
istioctl --Kubeconfig=c0.yaml x create-remote-secret --name c0 --auth-type=plugin --auth-plugin-name=gcp \
    | kubectl -n istio-system --Kubeconfig=c1.yaml apply -f -

istioctl experimental dashboard

(dashboard has graduated. Use `istioctl dashboard`)

istioctl experimental dashboard [flags]

istioctl experimental describe

Describe resource and related Istio configuration

istioctl experimental describe [flags]

istioctl experimental des [flags]

istioctl experimental describe pod

Analyzes pod, its Services, DestinationRules, and VirtualServices and reports the configuration objects that affect that pod.

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental describe pod <pod> [flags]

Examples

istioctl experimental describe pod productpage-v1-c7765c886-7zzd4

istioctl experimental describe service

Analyzes service, pods, DestinationRules, and VirtualServices and reports the configuration objects that affect that service.

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental describe service <svc> [flags]

istioctl experimental describe svc <svc> [flags]

Examples

istioctl experimental describe service productpage

istioctl experimental kube-uninject

kube-uninject is used to prevent Istio from adding a sidecar and also provides the inverse of "istioctl kube-inject -f".

istioctl experimental kube-uninject [flags]

Examples

# Update resources before applying.
kubectl apply -f <(istioctl experimental kube-uninject -f <resource.yaml>)

# Create a persistent version of the deployment by removing Envoy sidecar.
istioctl experimental kube-uninject -f deployment.yaml -o deployment-uninjected.yaml

# Update an existing deployment.
kubectl get deployment -o yaml | istioctl experimental kube-uninject -f - | kubectl apply -f -

istioctl experimental metrics

Prints the metrics for the specified service(s) when running in Kubernetes.

This command finds a Prometheus pod running in the specified istio system namespace. It then executes a series of queries per requested workload to find the following top-level workload metrics: total requests per second, error rate, and request latency at p50, p90, and p99 percentiles. The query results are printed to the console, organized by workload name.

All metrics returned are from server-side reports. This means that latencies and error rates are from the perspective of the service itself and not of an individual client (or aggregate set of clients). Rates and latencies are calculated over a time interval of 1 minute.

istioctl experimental metrics <workload name>...

istioctl experimental m <workload name>...

Examples

# Retrieve workload metrics for productpage-v1 workload
istioctl experimental metrics productpage-v1

# Retrieve workload metrics for various services in the different namespaces
istioctl experimental metrics productpage-v1.foo reviews-v1.bar ratings-v1.baz

istioctl experimental multicluster

Commands to assist in managing a multi-cluster mesh

istioctl experimental multicluster apply

Update clusters in a multi-cluster mesh based on mesh topology

istioctl experimental multicluster apply  -f <mesh.yaml> [flags]

istioctl experimental multicluster describe

Describe status of the multi-cluster mesh's control plane'

istioctl experimental multicluster describe -f <mesh.yaml> [--all] [flags]

istioctl experimental multicluster generate

generate a cluster-specific control plane configuration based on the mesh description and runtime state

istioctl experimental multicluster generate -f <mesh.yaml> [flags]

istioctl experimental post-install

Commands related to post-install

istioctl experimental post-install webhook

webhook command to manage webhook configurations

istioctl experimental post-install webhook disable

Disable webhook configurations

istioctl experimental post-install webhook disable [flags]

Examples

# Disable all webhooks
istioctl experimental post-install webhook disable

# Disable all webhooks except injection
istioctl experimental post-install webhook disable --injection=false

istioctl experimental post-install webhook enable

This command is used to enable webhook configurations after installing Istio. For previous Istio versions (e.g., 1.2, 1.3, etc), this command is not needed because in previous versions webhooks manage their own configurations.

istioctl experimental post-install webhook enable [flags]

Examples

# Enable the webhook configuration of Galley with the given webhook configuration
istioctl experimental post-install webhook enable --validation --webhook-secret istio.webhook.galley 
    --namespace istio-system --validation-path validatingwebhookconfiguration.yaml

# Enable the webhook configuration of Galley with the given webhook configuration and CA certificate
istioctl experimental post-install webhook enable --validation --webhook-secret istio.webhook.galley 
    --namespace istio-system --validation-path validatingwebhookconfiguration.yaml --ca-bundle-file ./k8s-ca-cert.pem

istioctl experimental post-install webhook status

Get webhook configurations

istioctl experimental post-install webhook status [flags]

Examples

# Display the webhook configuration of Galley
istioctl experimental post-install webhook status --validation --validation-config istio-galley
# Display the webhook configuration of Galley and Sidecar Injector
istioctl experimental post-install webhook status --validation --validation-config istio-galley 
  --injection --injection-config istio-sidecar-injector

istioctl experimental remove-from-mesh

Remove workloads from Istio service mesh

istioctl experimental remove-from-mesh [flags]

istioctl experimental rm [flags]

istioctl experimental remove-from-mesh deployment

istioctl experimental remove-from-mesh deployment restarts pods with the Istio sidecar un-injected. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh deployment [flags]

Examples

istioctl experimental remove-from-mesh deployment productpage-v1

istioctl experimental remove-from-mesh external-service

istioctl experimental remove-from-mesh external-service remove the ServiceEntry and\ the kubernetes Service for the specified external service(eg:services running on VM) from Istio service mesh. The typical usage scenario is Mesh Expansion on VMs. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh external-service <svcname> [flags]

Examples

istioctl experimental remove-from-mesh external-service vmhttp

istioctl experimental remove-from-mesh service

istioctl experimental remove-from-mesh service restarts pods with the Istio sidecar un-injected. THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl experimental remove-from-mesh service [flags]

Examples

istioctl experimental remove-from-mesh service productpage

istioctl experimental upgrade

The upgrade command checks for upgrade version eligibility and, if eligible, upgrades the Istio control plane components in-place. Warning: traffic may be disrupted during upgrade. Please ensure PodDisruptionBudgets are defined to maintain service continuity.

istioctl experimental upgrade [flags]

istioctl experimental wait

Waits for the specified condition to be true of an Istio resource.

istioctl experimental wait [flags] <type> <name>[.<namespace>]

Examples

# Wait until the bookinfo virtual service has been distributed to all proxies in the mesh
istioctl experimental wait --for=distribution virtualservice bookinfo.default

# Wait until 99% of the proxies receive the distribution, timing out after 5 minutes
istioctl experimental wait --for=distribution --threshold=.99 --timeout=300 virtualservice bookinfo.default

istioctl kube-inject

kube-inject manually injects the Envoy sidecar into Kubernetes workloads. Unsupported resources are left unmodified so it is safe to run kube-inject over a single file that contains multiple Service, ConfigMap, Deployment, etc. definitions for a complex application. It's best to do this when the resource is initially created.

k8s.io/docs/concepts/workloads/pods/pod-overview/#pod-templates is updated for Job, DaemonSet, ReplicaSet, Pod and Deployment YAML resource documents. Support for additional pod-based resource types can be added as necessary.

The Istio project is continually evolving so the Istio sidecar configuration may change unannounced. When in doubt re-run istioctl kube-inject on deployments to get the most up-to-date changes.

istioctl kube-inject [flags]

Examples

# Update resources on the fly before applying.
kubectl apply -f <(istioctl kube-inject -f <resource.yaml>)

# Create a persistent version of the deployment with Envoy sidecar
# injected.
istioctl kube-inject -f deployment.yaml -o deployment-injected.yaml

# Update an existing deployment.
kubectl get deployment -o yaml | istioctl kube-inject -f - | kubectl apply -f -

# Capture cluster configuration for later use with kube-inject
kubectl -n istio-system get cm istio-sidecar-injector  -o jsonpath="{.data.config}" > /tmp/inj-template.tmpl
kubectl -n istio-system get cm istio -o jsonpath="{.data.mesh}" > /tmp/mesh.yaml
kubectl -n istio-system get cm istio-sidecar-injector -o jsonpath="{.data.values}" > /tmp/values.json
# Use kube-inject based on captured configuration
istioctl kube-inject -f samples/bookinfo/platform/kube/bookinfo.yaml \
	--injectConfigFile /tmp/inj-template.tmpl \
	--meshConfigFile /tmp/mesh.yaml \
	--valuesFile /tmp/values.json

istioctl manifest

The manifest subcommand generates, applies, diffs or migrates Istio manifests.

istioctl manifest apply

The apply subcommand generates an Istio install manifest and applies it to a cluster.

istioctl manifest apply [flags]

Examples

  # Apply a default Istio installation
  istioctl manifest apply

  # Enable grafana dashboard
  istioctl manifest apply --set values.grafana.enabled=true

  # Generate the demo profile and don't wait for confirmation
  istioctl manifest apply --set profile=demo --skip-confirmation

  # To override a setting that includes dots, escape them with a backslash (\).  Your shell may require enclosing quotes.
  istioctl manifest apply --set "values.sidecarInjectorWebhook.injectedAnnotations.container\.apparmor\.security\.beta\.kubernetes\.io/istio-proxy=runtime/default"

istioctl manifest diff

The diff subcommand compares manifests from two files or directories.

istioctl manifest diff <file|dir> <file|dir> [flags]

istioctl manifest generate

The generate subcommand generates an Istio install manifest and outputs to the console by default.

istioctl manifest generate [flags]

Examples

  # Generate a default Istio installation
  istioctl manifest generate

  # Enable grafana dashboard
  istioctl manifest generate --set values.grafana.enabled=true

  # Generate the demo profile
  istioctl manifest generate --set profile=demo

  # To override a setting that includes dots, escape them with a backslash (\).  Your shell may require enclosing quotes.
  istioctl manifest generate --set "values.sidecarInjectorWebhook.injectedAnnotations.container\.apparmor\.security\.beta\.kubernetes\.io/istio-proxy=runtime/default"

istioctl manifest migrate

The migrate subcommand migrates a configuration from Helm values or IstioControlPlane format to IstioOperator format.

istioctl manifest migrate [<filepath>] [flags]

istioctl manifest versions

List the versions of Istio recommended for use or supported for upgrade by this version of the operator binary.

istioctl manifest versions [flags]

istioctl operator

The operator subcommand installs, removes and shows the status of the operator controller.

istioctl operator init

The init subcommand installs the Istio operator controller in the cluster.

istioctl operator init [flags]

istioctl operator remove

The remove subcommand removes the Istio operator controller from the cluster.

istioctl operator remove [flags]

istioctl profile

The profile subcommand lists, dumps or diffs Istio configuration profiles.

istioctl profile diff

The diff subcommand displays the differences between two Istio configuration profiles.

istioctl profile diff <file1.yaml> <file2.yaml> [flags]

istioctl profile dump

The dump subcommand dumps the values in an Istio configuration profile.

istioctl profile dump [<profile>] [flags]

istioctl profile list

The list subcommand lists the available Istio configuration profiles.

istioctl profile list [flags]

istioctl proxy-config

A group of commands used to retrieve information about proxy configuration from the Envoy config dump

Examples

  # Retrieve information about proxy configuration from an Envoy instance.
  istioctl proxy-config <clusters|listeners|routes|endpoints|bootstrap> <pod-name[.namespace]>

istioctl proxy-config bootstrap

Retrieve information about bootstrap configuration for the Envoy instance in the specified pod.

istioctl proxy-config bootstrap [<pod-name[.namespace]>] [flags]

istioctl proxy-config b [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve full bootstrap configuration for a given pod from Envoy.
  istioctl proxy-config bootstrap <pod-name[.namespace]>

  # Retrieve full bootstrap without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config bootstrap --file envoy-config.json

istioctl proxy-config cluster

Retrieve information about cluster configuration for the Envoy instance in the specified pod.

istioctl proxy-config cluster [<pod-name[.namespace]>] [flags]

istioctl proxy-config clusters [<pod-name[.namespace]>] [flags]
istioctl proxy-config c [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve summary about cluster configuration for a given pod from Envoy.
  istioctl proxy-config clusters <pod-name[.namespace]>

  # Retrieve cluster summary for clusters with port 9080.
  istioctl proxy-config clusters <pod-name[.namespace]> --port 9080

  # Retrieve full cluster dump for clusters that are inbound with a FQDN of details.default.svc.cluster.local.
  istioctl proxy-config clusters <pod-name[.namespace]> --fqdn details.default.svc.cluster.local --direction inbound -o json

  # Retrieve cluster summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config clusters --file envoy-config.json

istioctl proxy-config endpoint

Retrieve information about endpoint configuration for the Envoy instance in the specified pod.

istioctl proxy-config endpoint [<pod-name[.namespace]>] [flags]

istioctl proxy-config endpoints [<pod-name[.namespace]>] [flags]
istioctl proxy-config ep [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve full endpoint configuration for a given pod from Envoy.
  istioctl proxy-config endpoint <pod-name[.namespace]>

  # Retrieve endpoint summary for endpoint with port 9080.
  istioctl proxy-config endpoint <pod-name[.namespace]> --port 9080

  # Retrieve full endpoint with a address (172.17.0.2).
  istioctl proxy-config endpoint <pod-name[.namespace]> --address 172.17.0.2 -o json

  # Retrieve full endpoint with a cluster name (outbound|9411||zipkin.istio-system.svc.cluster.local).
  istioctl proxy-config endpoint <pod-name[.namespace]> --cluster "outbound|9411||zipkin.istio-system.svc.cluster.local" -o json
  # Retrieve full endpoint with the status (healthy).
  istioctl proxy-config endpoint <pod-name[.namespace]> --status healthy -ojson

  # Retrieve endpoint summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/clusters?format=json' > envoy-clusters.json
  istioctl proxy-config endpoints --file envoy-clusters.json

istioctl proxy-config listener

Retrieve information about listener configuration for the Envoy instance in the specified pod.

istioctl proxy-config listener [<pod-name[.namespace]>] [flags]

istioctl proxy-config listeners [<pod-name[.namespace]>] [flags]
istioctl proxy-config l [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve summary about listener configuration for a given pod from Envoy.
  istioctl proxy-config listeners <pod-name[.namespace]>

  # Retrieve listener summary for listeners with port 9080.
  istioctl proxy-config listeners <pod-name[.namespace]> --port 9080

  # Retrieve full listener dump for HTTP listeners with a wildcard address (0.0.0.0).
  istioctl proxy-config listeners <pod-name[.namespace]> --type HTTP --address 0.0.0.0 -o json

  # Retrieve listener summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config listeners --file envoy-config.json

istioctl proxy-config log

(experimental) Retrieve information about logging levels of the Envoy instance in the specified pod, and update optionally

istioctl proxy-config log <pod-name[.namespace]> [flags]

istioctl proxy-config o <pod-name[.namespace]> [flags]

Examples

  # Retrieve information about logging levels for a given pod from Envoy.
  istioctl proxy-config log <pod-name[.namespace]>

  # Update levels of the all loggers
  istioctl proxy-config log <pod-name[.namespace]> --level none

  # Update levels of the specified loggers.
  istioctl proxy-config log <pod-name[.namespace]> --level http:debug,redis:debug

  # Reset levels of all the loggers to default value (warning).
  istioctl proxy-config log <pod-name[.namespace]> -r

istioctl proxy-config route

Retrieve information about route configuration for the Envoy instance in the specified pod.

istioctl proxy-config route [<pod-name[.namespace]>] [flags]

istioctl proxy-config routes [<pod-name[.namespace]>] [flags]
istioctl proxy-config r [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve summary about route configuration for a given pod from Envoy.
  istioctl proxy-config routes <pod-name[.namespace]>

  # Retrieve route summary for route 9080.
  istioctl proxy-config route <pod-name[.namespace]> --name 9080

  # Retrieve full route dump for route 9080
  istioctl proxy-config route <pod-name[.namespace]> --name 9080 -o json

  # Retrieve route summary without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config routes --file envoy-config.json

istioctl proxy-config secret

(experimental) Retrieve information about secret configuration for the Envoy instance in the specified pod.

istioctl proxy-config secret [<pod-name[.namespace]>] [flags]

istioctl proxy-config s [<pod-name[.namespace]>] [flags]

Examples

  # Retrieve full secret configuration for a given pod from Envoy.
  istioctl proxy-config secret <pod-name[.namespace]>

  # Retrieve full bootstrap without using Kubernetes API
  ssh <user@hostname> 'curl localhost:15000/config_dump' > envoy-config.json
  istioctl proxy-config secret --file envoy-config.json

THIS COMMAND IS STILL UNDER ACTIVE DEVELOPMENT AND NOT READY FOR PRODUCTION USE.

istioctl proxy-status

Retrieves last sent and last acknowledged xDS sync from Pilot to each Envoy in the mesh

istioctl proxy-status [<pod-name[.namespace]>] [flags]

istioctl ps [<pod-name[.namespace]>] [flags]

Examples

# Retrieve sync status for all Envoys in a mesh
	istioctl proxy-status

# Retrieve sync diff for a single Envoy and Pilot
	istioctl proxy-status istio-egressgateway-59585c5b9c-ndc59.istio-system

istioctl register

Registers a service instance (e.g. VM) joining the mesh

istioctl register <svcname> <ip> [name1:]port1 [name2:]port2 ... [flags]

istioctl upgrade

The upgrade command checks for upgrade version eligibility and, if eligible, upgrades the Istio control plane components in-place. Warning: traffic may be disrupted during upgrade. Please ensure PodDisruptionBudgets are defined to maintain service continuity.

istioctl upgrade [flags]

istioctl validate

Validate Istio policy and rules (NOTE: validate is deprecated and will be removed in 1.6. Use 'istioctl analyze' to validate configuration.)

istioctl validate -f FILENAME [options] [flags]

Examples

		# Validate bookinfo-gateway.yaml
		istioctl validate -f bookinfo-gateway.yaml
		
		# Validate current deployments under 'default' namespace within the cluster
		kubectl get deployments -o yaml |istioctl validate -f -

		# Validate current services under 'default' namespace within the cluster
		kubectl get services -o yaml |istioctl validate -f -

		# Also see the related command 'istioctl analyze'
		istioctl analyze samples/bookinfo/networking/bookinfo-gateway.yaml

istioctl verify-install

verify-install verifies Istio installation status against the installation file you specified when you installed Istio. It loops through all the installation resources defined in your installation file and reports whether all of them are in ready status. It will report failure when any of them are not ready.

If you do not specify installation file it will perform pre-check for your cluster and report whether the cluster is ready for Istio installation.

istioctl verify-install [flags]

Examples

		# Verify that Istio can be freshly installed
		istioctl verify-install
		
		# Verify the deployment matches a custom Istio deployment configuration
		istioctl verify-install -f $HOME/istio.yaml

istioctl version

Prints out build version information

istioctl version [flags]

Environment variables

Exported metrics