Secure Gateways (File Mount)

11 minute read

The Control Ingress Traffic task describes how to configure an ingress gateway to expose an HTTP service to external traffic. This task shows how to expose a secure HTTPS service using either simple or mutual TLS.

The TLS required private key, server certificate, and root certificate, are configured using a file mount based approach.

Before you begin

Perform the steps in the Before you begin and Determining the ingress IP and ports sections of the Control Ingress Traffic task. After performing those steps you should have Istio and the httpbin service deployed, and the environment variables INGRESS_HOST and SECURE_INGRESS_PORT set.
For macOS users, verify that you use curl compiled with the LibreSSL library:
```
$ curl --version | grep LibreSSL
curl 7.54.0 (x86_64-apple-darwin17.0) libcurl/7.54.0 LibreSSL/2.0.20 zlib/1.2.11 nghttp2/1.24.0
```
If a version of LibreSSL is printed as in the output above, your curl should work correctly with the instructions in this task. Otherwise, try another installation of curl, for example on a Linux machine.

Generate client and server certificates and keys

For this task you can use your favorite tool to generate certificates and keys. This example uses a script from the https://github.com/nicholasjackson/mtls-go-example repository.

Clone the https://github.com/nicholasjackson/mtls-go-example repository:
```
$ git clone https://github.com/nicholasjackson/mtls-go-example
```
Change directory to the cloned repository:
```
$ pushd mtls-go-example
```
Generate the certificates for httpbin.example.com. Change <password> to any value you like in the following command:
```
$ ./generate.sh httpbin.example.com <password>
```
When prompted, select y for all the questions. The command will generate four directories: 1_root, 2_intermediate, 3_application, and 4_client containing the client and server certificates you use in the procedures below.

Move the certificates into a directory named httpbin.example.com:

$ mkdir ../httpbin.example.com && mv 1_root 2_intermediate 3_application 4_client ../httpbin.example.com

Go back to your previous directory:
```
$ popd
```

Configure a TLS ingress gateway with a file mount-based approach

In this section you configure an ingress gateway with port 443 to handle HTTPS traffic. You first create a secret with a certificate and a private key. The secret is mounted to a file on the /etc/istio/ingressgateway-certs path. You can then create a gateway definition that configures a server on port 443.

Create a Kubernetes secret to hold the server’s certificate and private key. Use kubectl to create the secret istio-ingressgateway-certs in namespace istio-system . The Istio gateway will load the secret automatically.
The secret must be named istio-ingressgateway-certs in the istio-system namespace to align with the configuration of the Istio default ingress gateway used in this task.
```
$ kubectl create -n istio-system secret tls istio-ingressgateway-certs --key httpbin.example.com/3_application/private/httpbin.example.com.key.pem --cert httpbin.example.com/3_application/certs/httpbin.example.com.cert.pem
secret "istio-ingressgateway-certs" created
```
Note that by default all the pods in the istio-system namespace can mount this secret and access the private key. You may want to deploy the ingress gateway in a separate namespace and create the secret there, so that only the ingress gateway pod will be able to mount it.
Verify that tls.crt and tls.key have been mounted in the ingress gateway pod:
```
$ kubectl exec -it -n istio-system $(kubectl -n istio-system get pods -l istio=ingressgateway -o jsonpath='{.items[0].metadata.name}') -- ls -al /etc/istio/ingressgateway-certs
```

Define a Gateway with a server section for port 443.

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: httpbin-gateway
spec:
  selector:
    istio: ingressgateway # use istio default ingress gateway
  servers:
  - port:
      number: 443
      name: https
      protocol: HTTPS
    tls:
      mode: SIMPLE
      serverCertificate: /etc/istio/ingressgateway-certs/tls.crt
      privateKey: /etc/istio/ingressgateway-certs/tls.key
    hosts:
    - "httpbin.example.com"
EOF

Configure routes for traffic entering via the Gateway. Define the same VirtualService as in the Control Ingress Traffic task:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: httpbin
spec:
  hosts:
  - "httpbin.example.com"
  gateways:
  - httpbin-gateway
  http:
  - match:
    - uri:
        prefix: /status
    - uri:
        prefix: /delay
    route:
    - destination:
        port:
          number: 8000
        host: httpbin
EOF

Access the httpbin service with HTTPS by sending an https request using curl to SECURE_INGRESS_PORT.
The --resolve flag instructs curl to supply the SNI value httpbin.example.com when accessing the gateway IP over TLS. The --cacert option instructs curl to use your generated certificate to verify the server.
The -HHost:httpbin.example.com flag is included but only really needed if SECURE_INGRESS_PORT is different from the actual gateway port (443), for example, if you are accessing the server via a mapped NodePort.
By sending the request to the /status/418 URL path, you get a nice visual clue that your httpbin service was indeed accessed. The httpbin service will return the 418 I’m a Teapot code.
```
$ curl -v -HHost:httpbin.example.com --resolve httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST --cacert httpbin.example.com/2_intermediate/certs/ca-chain.cert.pem https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418
...
Server certificate:
  subject: C=US; ST=Denial; L=Springfield; O=Dis; CN=httpbin.example.com
  start date: Jun 24 18:45:18 2018 GMT
  expire date: Jul  4 18:45:18 2019 GMT
  common name: httpbin.example.com (matched)
  issuer: C=US; ST=Denial; O=Dis; CN=httpbin.example.com
SSL certificate verify ok.
...
HTTP/2 418
...
-=[ teapot ]=-

   _...._
 .'  _ _ `.
| ."` ^ `". _,
\_;`"---"`|//
  |       ;/
  \_     _/
    `"""`
```
It might take time for the gateway definition to propagate so you might get the following error: Failed to connect to httpbin.example.com port <your secure port>: Connection refused. Wait for a minute and then retry the curl call.
Look for the Server certificate section in the curl output and specifically a line with the matched common name: common name: httpbin.example.com (matched). The line SSL certificate verify ok in the output indicates that the server’s certificate was verified successfully. If all went well, you should also see a returned status of 418 along with a nice drawing of a teapot.

Configure a mutual TLS ingress gateway

In this section you extend your gateway’s definition from the previous section to support mutual TLS between external clients and the gateway.

Create a Kubernetes Secret to hold the CA certificate that the server will use to verify its clients. Create the secret istio-ingressgateway-ca-certs in namespace istio-system using kubectl. The Istio gateway will automatically load the secret.
The secret must be named istio-ingressgateway-ca-certs in the istio-system namespace to align with the configuration of the Istio default ingress gateway used in this task.
```
$ kubectl create -n istio-system secret generic istio-ingressgateway-ca-certs --from-file=httpbin.example.com/2_intermediate/certs/ca-chain.cert.pem
secret "istio-ingressgateway-ca-certs" created
```

Redefine your previous Gateway to change the tls mode to MUTUAL and to specify caCertificates:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: httpbin-gateway
spec:
  selector:
    istio: ingressgateway # use istio default ingress gateway
  servers:
  - port:
      number: 443
      name: https
      protocol: HTTPS
    tls:
      mode: MUTUAL
      serverCertificate: /etc/istio/ingressgateway-certs/tls.crt
      privateKey: /etc/istio/ingressgateway-certs/tls.key
      caCertificates: /etc/istio/ingressgateway-ca-certs/ca-chain.cert.pem
    hosts:
    - "httpbin.example.com"
EOF

Access the httpbin service by HTTPS as in the previous section:
```
$ curl -HHost:httpbin.example.com --resolve httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST --cacert httpbin.example.com/2_intermediate/certs/ca-chain.cert.pem https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418
curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
```
It might take time for the gateway definition to propagate so you might still get 418. Wait for a minute and then retry the curl call.
This time you will get an error since the server refuses to accept unauthenticated requests. You need to pass curl a client certificate and your private key for signing the request.

Resend the previous request by curl, this time passing as parameters your client certificate (additional --cert option) and your private key (the --key option):

$ curl -HHost:httpbin.example.com --resolve httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST --cacert httpbin.example.com/2_intermediate/certs/ca-chain.cert.pem --cert httpbin.example.com/4_client/certs/httpbin.example.com.cert.pem --key httpbin.example.com/4_client/private/httpbin.example.com.key.pem https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418

-=[ teapot ]=-

   _...._
 .'  _ _ `.
| ."` ^ `". _,
\_;`"---"`|//
  |       ;/
  \_     _/
    `"""`

This time the server performed client authentication successfully and you received the pretty teapot drawing again.

Configure a TLS ingress gateway for multiple hosts

In this section you will configure an ingress gateway for multiple hosts, httpbin.example.com and bookinfo.com. The ingress gateway will present to clients a unique certificate corresponding to each requested server.

Unlike the previous sections, the Istio default ingress gateway will not work out of the box because it is only preconfigured to support one secure host. You’ll need to first configure and redeploy the ingress gateway server with another secret, before you can use it to handle a second host.

Generate client and server certificates and keys for `bookinfo.com`

Perform the same steps as in Generate client and server certificates and keys, only this time for host bookinfo.com instead of httpbin.example.com.

Change directory to the cloned repository:
```
$ pushd mtls-go-example
```
Generate the certificates for bookinfo.com. Change <password> to any value you like in the following command:
```
$ ./generate.sh bookinfo.com <password>
```
When prompted, select y for all the questions.

Move the certificates into a directory named bookinfo.com:

$ mkdir ../bookinfo.com && mv 1_root 2_intermediate 3_application 4_client ../bookinfo.com

Go back to your previous directory:
```
$ popd
```

Redeploy `istio-ingressgateway` with the new certificates

Create a new secret to hold the certificate for bookinfo.com:

$ kubectl create -n istio-system secret tls istio-ingressgateway-bookinfo-certs --key bookinfo.com/3_application/private/bookinfo.com.key.pem --cert bookinfo.com/3_application/certs/bookinfo.com.cert.pem
secret "istio-ingressgateway-bookinfo-certs" created

To include a volume mounted from the new created secret, update the istio-ingressgateway deployment. To patch the istio-ingressgateway deployment, create the following patch.json file:

$ cat > patch.json <<EOF
[{
  "op": "add",
  "path": "/spec/template/spec/containers/0/volumeMounts/0",
  "value": {
    "mountPath": "/etc/istio/ingressgateway-bookinfo-certs",
    "name": "ingressgateway-bookinfo-certs",
    "readOnly": true
  }
},
{
  "op": "add",
  "path": "/spec/template/spec/volumes/0",
  "value": {
  "name": "ingressgateway-bookinfo-certs",
    "secret": {
      "secretName": "istio-ingressgateway-bookinfo-certs",
      "optional": true
    }
  }
}]
EOF

Apply istio-ingressgateway deployment patch with the following command:

$ kubectl -n istio-system patch --type=json deploy istio-ingressgateway -p "$(cat patch.json)"

Verify that the key and certificate have been successfully loaded in the istio-ingressgateway pod:

$ kubectl exec -it -n istio-system $(kubectl -n istio-system get pods -l istio=ingressgateway -o jsonpath='{.items[0].metadata.name}') -- ls -al /etc/istio/ingressgateway-bookinfo-certs

tls.crt and tls.key should appear in the directory contents.

Configure traffic for the `bookinfo.com` host

Deploy the Bookinfo sample application, without a gateway:

$ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@

Define a gateway for bookinfo.com:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: bookinfo-gateway
spec:
  selector:
    istio: ingressgateway # use istio default ingress gateway
  servers:
  - port:
      number: 443
      name: https-bookinfo
      protocol: HTTPS
    tls:
      mode: SIMPLE
      serverCertificate: /etc/istio/ingressgateway-bookinfo-certs/tls.crt
      privateKey: /etc/istio/ingressgateway-bookinfo-certs/tls.key
    hosts:
    - "bookinfo.com"
EOF

Configure the routes for bookinfo.com. Define a VirtualService like the one in samples/bookinfo/networking/bookinfo-gateway.yaml:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: bookinfo
spec:
  hosts:
  - "bookinfo.com"
  gateways:
  - bookinfo-gateway
  http:
  - match:
    - uri:
        exact: /productpage
    - uri:
        exact: /login
    - uri:
        exact: /logout
    - uri:
        prefix: /api/v1/products
    route:
    - destination:
        host: productpage
        port:
          number: 9080
EOF

Send a request to the Bookinfo productpage:

$ curl -o /dev/null -s -v -w "%{http_code}\n" -HHost:bookinfo.com --resolve bookinfo.com:$SECURE_INGRESS_PORT:$INGRESS_HOST --cacert bookinfo.com/2_intermediate/certs/ca-chain.cert.pem -HHost:bookinfo.com https://bookinfo.com:$SECURE_INGRESS_PORT/productpage
...
Server certificate:
  subject: C=US; ST=Denial; L=Springfield; O=Dis; CN=bookinfo.com
  start date: Aug 12 13:50:05 2018 GMT
  expire date: Aug 22 13:50:05 2019 GMT
  common name: bookinfo.com (matched)
  issuer: C=US; ST=Denial; O=Dis; CN=bookinfo.com
SSL certificate verify ok.
...
200

Verify that httbin.example.com is accessible as previously. Send a request to it and see again the teapot you should already love:

$ curl -v -HHost:httpbin.example.com --resolve httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST --cacert httpbin.example.com/2_intermediate/certs/ca-chain.cert.pem --cert httpbin.example.com/4_client/certs/httpbin.example.com.cert.pem --key httpbin.example.com/4_client/private/httpbin.example.com.key.pem https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418
...
-=[ teapot ]=-

   _...._
 .'  _ _ `.
| ."` ^ `". _,
\_;`"---"`|//
  |       ;/
  \_     _/
    `"""`

Troubleshooting

Inspect the values of the INGRESS_HOST and SECURE_INGRESS_PORT environment variables. Make sure they have valid values, according to the output of the following commands:
```
$ kubectl get svc -n istio-system
$ echo INGRESS_HOST=$INGRESS_HOST, SECURE_INGRESS_PORT=$SECURE_INGRESS_PORT
```

Verify that the key and the certificate are successfully loaded in the istio-ingressgateway pod:

$ kubectl exec -it -n istio-system $(kubectl -n istio-system get pods -l istio=ingressgateway -o jsonpath='{.items[0].metadata.name}') -- ls -al /etc/istio/ingressgateway-certs

tls.crt and tls.key should exist in the directory contents.

If you created the istio-ingressgateway-certs secret, but the key and the certificate are not loaded, delete the ingress gateway pod and force the ingress gateway pod to restart and reload key and certificate.
```
$ kubectl delete pod -n istio-system -l istio=ingressgateway
```

Verify that the Subject is correct in the certificate of the ingress gateway:

$ kubectl exec -i -n istio-system $(kubectl get pod -l istio=ingressgateway -n istio-system -o jsonpath='{.items[0].metadata.name}')  -- cat /etc/istio/ingressgateway-certs/tls.crt | openssl x509 -text -noout | grep 'Subject:'
    Subject: C=US, ST=Denial, L=Springfield, O=Dis, CN=httpbin.example.com

Verify that the proxy of the ingress gateway is aware of the certificates:

$ kubectl exec -ti $(kubectl get po -l istio=ingressgateway -n istio-system -o jsonpath='{.items[0].metadata.name}') -n istio-system -- pilot-agent request GET certs
{
  "ca_cert": "",
  "cert_chain": "Certificate Path: /etc/istio/ingressgateway-certs/tls.crt, Serial Number: 100212, Days until Expiration: 370"
}

Check the log of istio-ingressgateway for error messages:

$ kubectl logs -n istio-system -l istio=ingressgateway

For macOS users, verify that you use curl compiled with the LibreSSL library, as described in the Before you begin section.

Troubleshooting for mutual TLS

In addition to the steps in the previous section, perform the following:

Verify that the CA certificate is loaded in the istio-ingressgateway pod:

$ kubectl exec -it -n istio-system $(kubectl -n istio-system get pods -l istio=ingressgateway -o jsonpath='{.items[0].metadata.name}') -- ls -al /etc/istio/ingressgateway-ca-certs

ca-chain.cert.pem should exist in the directory contents.

If you created the istio-ingressgateway-ca-certs secret, but the CA certificate is not loaded, delete the ingress gateway pod and force it to reload the certificate:
```
$ kubectl delete pod -n istio-system -l istio=ingressgateway
```

Verify that the Subject is correct in the CA certificate of the ingress gateway:

$ kubectl exec -i -n istio-system $(kubectl get pod -l istio=ingressgateway -n istio-system -o jsonpath='{.items[0].metadata.name}')  -- cat /etc/istio/ingressgateway-ca-certs/ca-chain.cert.pem | openssl x509 -text -noout | grep 'Subject:'
Subject: C=US, ST=Denial, L=Springfield, O=Dis, CN=httpbin.example.com

Cleanup

Delete the Gateway configuration, the VirtualService, and the secrets:

$ kubectl delete gateway --ignore-not-found=true httpbin-gateway bookinfo-gateway
$ kubectl delete virtualservice httpbin
$ kubectl delete --ignore-not-found=true -n istio-system secret istio-ingressgateway-certs istio-ingressgateway-ca-certs
$ kubectl delete --ignore-not-found=true virtualservice bookinfo

Delete the directories of the certificates and the repository used to generate them:
```
$ rm -rf httpbin.example.com bookinfo.com mtls-go-example
```
Remove the file you used for redeployment of istio-ingressgateway:
```
$ rm -f $HOME/istio-ingressgateway.yaml
```

Shutdown the httpbin service:

$ kubectl delete --ignore-not-found=true -f @samples/httpbin/httpbin.yaml@

Secure Gateways (File Mount)

Before you begin

Generate client and server certificates and keys

Configure a TLS ingress gateway with a file mount-based approach

Configure a mutual TLS ingress gateway

Configure a TLS ingress gateway for multiple hosts

Generate client and server certificates and keys for bookinfo.com

Redeploy istio-ingressgateway with the new certificates

Configure traffic for the bookinfo.com host

Troubleshooting

Troubleshooting for mutual TLS

Cleanup

Generate client and server certificates and keys for `bookinfo.com`

Redeploy `istio-ingressgateway` with the new certificates

Configure traffic for the `bookinfo.com` host