Ztunnel traffic redirection
In the context of ambient mode, traffic redirection refers to data plane functionality that intercepts traffic sent to and from ambient-enabled workloads, routing it through the ztunnel node proxies that handle the core data path. Sometimes the term traffic capture is also used.
Istio’s in-pod traffic redirection model
The core design principle underlying ambient mode’s in-pod traffic redirection is that the ztunnel proxy has the ability to perform data path capture inside the Linux network namespace of the workload pod. This is achieved via a cooperation of functionality between the istio-cni node agent and the ztunnel node proxy. A key benefit of this model is that it enables Istio’s ambient mode to work alongside any Kubernetes CNI plugin, transparently, and without impacting Kubernetes networking features.
The following figure illustrates the sequence of events when a new workload pod is started in (or added to) an ambient-enabled namespace.
The istio-cni node agent responds to CNI events such as pod creation and deletion, and also watches the underlying Kubernetes API server for events such as the ambient label being added to a pod or namespace.
The istio-cni node agent additionally installs a chained CNI plugin that is executed by the container runtime after the primary CNI plugin within that Kubernetes cluster executes. Its only purpose is to notify the istio-cni node agent when a new pod is created by the container runtime in a namespace that is already enrolled in ambient mode, and propagate the new pod context to istio-cni.
Once the istio-cni node agent is notified that a pod needs to be added to the mesh (either from the CNI plugin, if the pod is brand new, or from the Kubernetes API server, if the pod is already running but needs to be added), the following sequence of operations is performed:
istio-cnienters the pod’s network namespace and establishes network redirection rules, such that packets entering and leaving the pod are intercepted and transparently redirected to the node-local ztunnel proxy instance listening on well-known ports (15008, 15006, 15001).The
istio-cninode agent then informs the ztunnel proxy, over a Unix domain socket, that it should establish local proxy listening ports inside the pod’s network namespace (on ports 15008, 15006, and 15001), and provides ztunnel with a low-level Linux file descriptor representing the pod’s network namespace.- While typically sockets are created within a Linux network namespace by the process actually running inside that network namespace, it is perfectly possible to leverage Linux’s low-level socket API to allow a process running in one network namespace to create listening sockets in another network namespace, assuming the target network namespace is known at creation time.
The node-local ztunnel internally spins up a new proxy instance and listen port set, dedicated to the newly-added pod.
Once the in-pod redirect rules are in place and the ztunnel has established the listen ports, the pod is added in the mesh and traffic begins flowing through the node-local ztunnel.
Traffic to and from pods in the mesh will be fully encrypted with mTLS by default.
Data will now enter and leave the pod network namespace encrypted. Every pod in the mesh has the ability to enforce mesh policy and securely encrypt traffic, even though the user application running in the pod has no awareness of either.
Here’s a diagram to illustrate how encrypted traffic flows between pods in the ambient mesh in the new model:
Observing and debugging traffic redirection in ambient mode
If traffic redirection is not working correctly in ambient mode, some quick checks can be made to help narrow down the problem. To demonstrate traffic redirection in action, first follow the steps described in the ztunnel L4 networking guide, including deployment of Istio with ambient mode enabled in a Kubernetes cluster, and the deployment of httpbin and sleep in the namespace tagged for ambient mode. Once you have verified that the application is successfully running in the ambient mesh, you can use the following steps to observe the traffic redirection.
Check the ztunnel proxy logs
When an application pod is part of an ambient mesh, you can check the ztunnel proxy logs to confirm the mesh is redirecting traffic. As shown in the example below, the ztunnel logs related to inpod indicate that in-pod redirection mode is enabled, the proxy has received the network namespace (netns) information about an ambient application pod, and has started proxying for it.
$ kubectl logs ds/ztunnel -n istio-system | grep inpod
Found 3 pods, using pod/ztunnel-hl94n
inpod_enabled: true
inpod_uds: /var/run/ztunnel/ztunnel.sock
inpod_port_reuse: true
inpod_mark: 1337
2024-02-21T22:01:49.916037Z INFO ztunnel::inpod::workloadmanager: handling new stream
2024-02-21T22:01:49.919944Z INFO ztunnel::inpod::statemanager: pod WorkloadUid("1e054806-e667-4109-a5af-08b3e6ba0c42") received netns, starting proxy
2024-02-21T22:01:49.925997Z INFO ztunnel::inpod::statemanager: pod received snapshot sent
2024-02-21T22:03:49.074281Z INFO ztunnel::inpod::statemanager: pod delete request, draining proxy
2024-02-21T22:04:58.446444Z INFO ztunnel::inpod::statemanager: pod WorkloadUid("1e054806-e667-4109-a5af-08b3e6ba0c42") received netns, starting proxy
Confirm the state of sockets
Follow the steps below to confirm that the sockets on ports 15001, 15006, and 15008 are open and in the listening state.
$ kubectl debug $(kubectl get pod -l app=sleep -n ambient-demo -o jsonpath='{.items[0].metadata.name}') -it -n ambient-demo --image nicolaka/netshoot -- ss -ntlp
Defaulting debug container name to debugger-nhd4d.
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 128 127.0.0.1:15080 0.0.0.0:*
LISTEN 0 128 *:15006 *:*
LISTEN 0 128 *:15001 *:*
LISTEN 0 128 *:15008 *:*
Check the iptables rules setup
To view the iptables rules setup inside one of the application pods, execute this command:
$ kubectl debug $(kubectl get pod -l app=sleep -n ambient-demo -o jsonpath='{.items[0].metadata.name}') -it --image gcr.io/istio-release/base --profile=netadmin -n ambient-demo -- iptables-save
Defaulting debug container name to debugger-m44qc.
# Generated by iptables-save v1.8.7 on Wed Feb 21 20:38:16 2024
*mangle
:PREROUTING ACCEPT [320:53261]
:INPUT ACCEPT [23753:267657744]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [23352:134432712]
:POSTROUTING ACCEPT [23352:134432712]
:ISTIO_OUTPUT - [0:0]
:ISTIO_PRERT - [0:0]
-A PREROUTING -j ISTIO_PRERT
-A OUTPUT -j ISTIO_OUTPUT
-A ISTIO_OUTPUT -m connmark --mark 0x111/0xfff -j CONNMARK --restore-mark --nfmask 0xffffffff --ctmask 0xffffffff
-A ISTIO_PRERT -m mark --mark 0x539/0xfff -j CONNMARK --set-xmark 0x111/0xfff
-A ISTIO_PRERT -s 169.254.7.127/32 -p tcp -m tcp -j ACCEPT
-A ISTIO_PRERT ! -d 127.0.0.1/32 -i lo -p tcp -j ACCEPT
-A ISTIO_PRERT -p tcp -m tcp --dport 15008 -m mark ! --mark 0x539/0xfff -j TPROXY --on-port 15008 --on-ip 0.0.0.0 --tproxy-mark 0x111/0xfff
-A ISTIO_PRERT -p tcp -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A ISTIO_PRERT ! -d 127.0.0.1/32 -p tcp -m mark ! --mark 0x539/0xfff -j TPROXY --on-port 15006 --on-ip 0.0.0.0 --tproxy-mark 0x111/0xfff
COMMIT
# Completed on Wed Feb 21 20:38:16 2024
# Generated by iptables-save v1.8.7 on Wed Feb 21 20:38:16 2024
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [175:13694]
:POSTROUTING ACCEPT [205:15494]
:ISTIO_OUTPUT - [0:0]
-A OUTPUT -j ISTIO_OUTPUT
-A ISTIO_OUTPUT -d 169.254.7.127/32 -p tcp -m tcp -j ACCEPT
-A ISTIO_OUTPUT -p tcp -m mark --mark 0x111/0xfff -j ACCEPT
-A ISTIO_OUTPUT ! -d 127.0.0.1/32 -o lo -j ACCEPT
-A ISTIO_OUTPUT ! -d 127.0.0.1/32 -p tcp -m mark ! --mark 0x539/0xfff -j REDIRECT --to-ports 15001
COMMIT
The command output shows that additional Istio-specific chains are added to the NAT and Mangle tables in netfilter/iptables within the application pod’s network namespace. All TCP traffic coming into the pod is redirected to the ztunnel proxy for ingress processing. If the traffic is plaintext (source port != 15008), it will be redirected to the in-pod ztunnel plaintext listening port 15006. If the traffic is HBONE (source port == 15008), it will be redirected to the in-pod ztunnel HBONE listening port 15008. Any TCP traffic leaving the pod is redirected to ztunnel’s port 15001 for egress processing, before being sent out by ztunnel using HBONE encapsulation.