Migrate pre-Istio 1.4 Alpha security policy to the current APIs

A tutorial to help customers migrate from the deprecated v1alpha1 security policy to the supported v1beta1 version.

Mar 3, 2021 | By Yangmin Zhu - Google, Craig Box - Google

In versions of Istio prior to 1.4, security policy was configured using v1alpha1 APIs (MeshPolicy, Policy, ClusterRbacConfig, ServiceRole and ServiceRoleBinding). After consulting with our early adopters, we made major improvements to the policy system and released v1beta1 APIs along with Istio 1.4. These refreshed APIs (PeerAuthentication, RequestAuthentication and AuthorizationPolicy) helped standardize how we define policy targets in Istio, helped users understand where policies were applied, and cut the number of configuration objects required.

The old APIs were deprecated in Istio 1.4. Two releases after the v1beta1 APIs were introduced, Istio 1.6 removed support for the v1alpha1 APIs.

If you are using a version of Istio prior to 1.6 and you want to upgrade, you will have to migrate your alpha security policy objects to the beta API. This tutorial will help you make that move.

Overview

Your control plane must first be upgraded to a version that supports the v1beta1 security policy.

It is recommended to first upgrade to Istio 1.5 as a transitive version, because it is the only version that supports both v1alpha1 and v1beta1 security policies. You will complete the security policy migration in Istio 1.5, remove the v1alpha1 security policy, and then continue to upgrade to later Istio versions. For a given workload, the v1beta1 version will take precedence over the v1alpha1 version.

Alternatively, if you want to do a skip-level upgrade directly from Istio 1.4 to 1.6 or later, you should use the canary upgrade method to install a new Istio version as a separate control plane, and gradually migrate your workloads to the new control plane completing the security policy migration at the same time.

In either case, it is recommended to migrate using namespace granularity: for each namespace, find all the v1alpha1 policies that have an effect on workloads in the namespace and migrate all the policies to v1beta1 at the same time. This allows a safer migration as you can make sure everything is working as expected, and then move forward to the next namespace.

Major differences

Before starting the migration, read through the v1beta1 authentication and authorization documentation to understand the v1beta1 policy.

You should examine all of your existing v1alpha1 security policies, find out what fields are used and which policies need migration, compare the findings with the major differences listed below and confirm there are no blocking issues (e.g., using an alpha feature that is no longer supported in beta):

Major Differencesv1alpha1v1beta1
API stabilitynot backward compatiblebackward compatible
mTLSMeshPolicy and PolicyPeerAuthentication
JWTMeshPolicy and PolicyRequestAuthentication
AuthorizationClusterRbacConfig, ServiceRole and ServiceRoleBindingAuthorizationPolicy
Policy targetservice name basedworkload selector based
Port numberservice portsworkload ports

Although RequestAuthentication in v1beta1 security policy is similar to the v1alpha1 JWT policy, there is a notable semantics change. The v1alpha1 JWT policy needs to be migrated to two v1beta1 resources: RequestAuthentication and AuthorizationPolicy. This will change the JWT deny message due to the use of AuthorizationPolicy. In the alpha version, the HTTP code 401 is returned with the body Origin authentication failed. In the beta version, the HTTP code 403 is returned with the body RBAC: access denied.

The v1alpha1 JWT policy triggerRule field is replaced by the AuthorizationPolicy with the exception that the regex field is no longer supported.

Migration flow

This section describes in detail how to migrate a v1alpha1 security policy.

For each namespace, find all v1alpha1 security policies that have an effect on workloads in the namespace. The result could include:

Step 2: Convert service name to workload selector

The v1alpha1 policy selects targets using their service name. You should refer to the corresponding service definition to decide the workload selector that should be used in the v1beta1 policy.

A single v1alpha1 policy may include multiple services. It will need to be migrated to multiple v1beta1 policies because the v1beta1 policy currently only supports at most one workload selector per policy.

Also note the v1alpha1 policy uses service port but the v1beta1 policy uses the workload port. This means the port number might be different in the migrated v1beta1 policy.

Step 3: Migrate authentication policy

For each v1alpha1 authentication policy, migrate with the following rules:

  1. If the whole namespace is enabled with mTLS or JWT, create the PeerAuthentication, RequestAuthentication and AuthorizationPolicy without a workload selector for the whole namespace. Fill out the policy based on the semantics of the corresponding MeshPolicy or Policy for the namespace.

  2. If a workload is enabled with mTLS or JWT, create the PeerAuthentication, RequestAuthentication and AuthorizationPolicy with a corresponding workload selector for the workload. Fill out the policy based on the semantics of the corresponding MeshPolicy or Policy for the workload.

  3. For mTLS related configuration, use STRICT mode if the alpha policy is using STRICT, or use PERMISSIVE in all other cases.

  4. For JWT related configuration, refer to the end-user authentication documentation to learn how to migrate to RequestAuthentication and AuthorizationPolicy.

A security policy migration tool is provided to automatically migrate authentication policy automatically. Please refer to the tool’s README for its usage.

Step 4: Migrate RBAC policy

For each v1alpha1 RBAC policy, migrate with the following rules:

  1. If the whole namespace is enabled with RBAC, create an AuthorizationPolicy without a workload selector for the whole namespace. Add an empty rule so that it will deny all requests to the namespace by default.

  2. If a workload is enabled with RBAC, create an AuthorizationPolicy with a corresponding workload selector for the workload. Add rules based on the semantics of the corresponding ServiceRole and ServiceRoleBinding for the workload.

Step 5: Verify migrated policy

  1. Double check the migrated v1beta1 policies: make sure there are no policies with duplicate names, the namespace is specified correctly and all v1alpha1 policies for the given namespace are migrated.

  2. Dry-run the v1beta1 policy with the command kubectl apply --dry-run=server -f beta-policy.yaml to make sure it is valid.

  3. Apply the v1beta1 policy to the given namespace and closely monitor the effect. Make sure to test both allow and deny scenarios if JWT or authorization are used.

  4. Migrate the next namespace. Only remove the v1alpha1 policy after completing migration for all namespaces successfully.

Example

v1alpha1 policy

This section gives a full example showing the migration for namespace foo. Assume the namespace foo has the following v1alpha1 policies that affect the workloads in it:

# A MeshPolicy that enables mTLS globally, including the whole foo namespace
apiVersion: "authentication.istio.io/v1alpha1"
kind: "MeshPolicy"
metadata:
  name: "default"
spec:
  peers:
  - mtls: {}
---
# A Policy that enables mTLS permissive mode and enables JWT for the httpbin service on port 8000
apiVersion: authentication.istio.io/v1alpha1
kind: Policy
metadata:
  name: httpbin
  namespace: foo
spec:
  targets:
  - name: httpbin
    ports:
    - number: 8000
  peers:
  - mtls:
      mode: PERMISSIVE
  origins:
  - jwt:
      issuer: testing@example.com
      jwksUri: https://www.example.com/jwks.json
      triggerRules:
      - includedPaths:
        - prefix: /admin/
        excludedPaths:
        - exact: /admin/status
  principalBinding: USE_ORIGIN
---
# A ClusterRbacConfig that enables RBAC globally, including the foo namespace
apiVersion: "rbac.istio.io/v1alpha1"
kind: ClusterRbacConfig
metadata:
  name: default
spec:
  mode: 'ON'
---
# A ServiceRole that enables RBAC for the httpbin service
apiVersion: "rbac.istio.io/v1alpha1"
kind: ServiceRole
metadata:
  name: httpbin
  namespace: foo
spec:
  rules:
  - services: ["httpbin.foo.svc.cluster.local"]
    methods: ["GET"]
---
# A ServiceRoleBinding for the above ServiceRole
apiVersion: "rbac.istio.io/v1alpha1"
kind: ServiceRoleBinding
metadata:
  name: httpbin
  namespace: foo
spec:
  subjects:
  - user: cluster.local/ns/foo/sa/sleep
    roleRef:
      kind: ServiceRole
      name: httpbin

httpbin service

The httpbin service has the following definition:

apiVersion: v1
kind: Service
metadata:
  name: httpbin
  namespace: foo
spec:
  ports:
  - name: http
    port: 8000
    targetPort: 80
  selector:
    app: httpbin

This means the service name httpbin should be replaced by the workload selector app: httpbin, and the service port 8000 should be replaced by the workload port 80.

v1beta1 authentication policy

The migrated v1beta1 policies for the v1alpha1 authentication policies in foo namespace are listed below:

# A PeerAuthentication that enables mTLS for the foo namespace, migrated from the MeshPolicy
# Alternatively the MeshPolicy could also be migrated to a PeerAuthentication at mesh level
apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: default
  namespace: foo
spec:
  mtls:
    mode: STRICT
---
# A PeerAuthentication that enables mTLS for the httpbin workload, migrated from the Policy
apiVersion: security.istio.io/v1beta1
kind: PeerAuthentication
metadata:
  name: httpbin
  namespace: foo
spec:
  selector:
    matchLabels:
      app: httpbin
  # port level mtls set for the workload port 80 corresponding to the service port 8000
  portLevelMtls:
    80:
      mode: PERMISSIVE
--
# A RequestAuthentication that enables JWT for the httpbin workload, migrated from the Policy
apiVersion: security.istio.io/v1beta1
kind: RequestAuthentication
metadata:
  name: httpbin
  namespace: foo
spec:
  selector:
    matchLabels:
      app: httpbin
  jwtRules:
  - issuer: testing@example.com
    jwksUri: https://www.example.com/jwks.json
---
# An AuthorizationPolicy that enforces to require JWT validation for the httpbin workload, migrated from the Policy
apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: httpbin-jwt
  namespace: foo
spec:
  # Use DENY action to explicitly deny requests without JWT token
  action: DENY
  selector:
    matchLabels:
      app: httpbin
  rules:
  - from:
    - source:
        # This makes sure requests without JWT token will be denied
        notRequestPrincipals: ["*"]
    to:
    - operation:
        # This should be the workload port 80, not the service port 8000
        ports: ["80"]
        # The path and notPath is converted from the trigger rule in the Policy
        paths: ["/admin/*"]
        notPaths: ["/admin/status"]

v1beta1 authorization policy

The migrated v1beta1 policies for the v1alpha1 RBAC policies in foo namespace are listed below:

# An AuthorizationPolicy that denies by default, migrated from the ClusterRbacConfig
apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: default
  namespace: foo
spec:
  # An empty rule that allows nothing
  {}
---
# An AuthorizationPolicy that enforces to authorization for the httpbin workload, migrated from the ServiceRole and ServiceRoleBinding
apiVersion: security.istio.io/v1beta1
kind: AuthorizationPolicy
metadata:
  name: httpbin
  namespace: foo
spec:
  selector:
    matchLabels:
      app: httpbin
      version: v1
  action: ALLOW
  rules:
  - from:
    - source:
        principals: ["cluster.local/ns/foo/sa/sleep"]
    to:
    - operation:
        methods: ["GET"]

Finish the upgrade

Congratulations; having reached this point, you should only have v1beta1 policy objects, and you will be able to continue upgrading Istio to 1.6 and beyond.

Share this post